Oct. 15, 2006
100BASE-LX/1000BASE-LX Spring-Latch SFP Transceiver
(For 10km transmission with MCU version)
Members of Flexon
TM
Family
Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
Compatible with Telcordia GR-468-CORE
RoHS compliance
Description
Fiberxon FTM-3413C-SLCG SFP transceiver is high
performance, cost effective module. It is designed
for Gigabit Ethernet for 100BASE-LX/1000BASE-LX
Features
Build-in PHY supporting SGMII Interface
Build-in high performance MCU supporting
easier configuration
Support more link status monitor, such as CRC,
package counter and Far End Fault Indication
(FEFI)
Dual data-rate of 100BASE-LX/1000BASE-LX
operation
1310nm FP laser and PIN photo-detector
0.5m~10km transmission with SMF
Standard serial ID information Compatible with
SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
Very low EMI and excellent ESD protection
+3.3V single power supply
Operating case temperature: 0 to +70°C
applications from 0.5m to 10km with SMF.
The transceiver consists of two sections: The
standard
SFP
part
and
the
PHY
part.
FTM-3413C-SLCG is built with SGMII interface. It
can operate as 100BASE-LX or 1000BASE-LX by
software configuration or rate select hardware pin.
independently
The optical output can be disabled by a TTL logic
high-level input of Tx Disable, and the system also
can disable the module via I2C. Tx Fault is provided
to indicate that degradation of the laser. Loss of
signal (LOS) output is provided to indicate the loss
of an input optical signal of receiver or the link status
with partner. The system can also get the LOS(or
Link)/Disable/Fault information via I2C register
access.
The standard serial ID information Compatible with
SFP MSA describes the transceiver’s capabilities,
standard
interfaces,
manufacturer
and
other
information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP
Multi-Source Agreement (MSA).
Building-in high performance MCU in this module,
Host can more easily configure all functions of
FTM-3413C-SLCG.
Page 1 of 10
Applications
Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems
Standard
Compatible with SFP MSA
Compatible with IEEE 802.3-2002
Compatible with IEEE 802.3ah-2004
Compatible with FCC 47 CFR Part 15, Class B
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute