THIN FILM CHIP RESISTORS
68 Series 0.020”x0.020”
All parts are 100% electrically tested, sample tested per MIL-STD-38534 section 3.4, and
visually inspected to MIL-STD-883 requirements. Chips are supplied in standard 2"x 2"
matrix tray packaging.
Ordering Information
Base Part Code
68xxx-
Value (3 digits plus exponent)
Tolerance Letter
NNNE
X
68AL(Nichrome top-contact)
(Under 100 ohms, an R indicates the
decimal point location)
B=0.1%
C=0.25%
D=0.5%
F=1%
68ALT(Tantalum-nitride top-
contact)
G=2%
J=5%
68BCN(Nichrome back-contact)
K=10%
M=20%
68BCR(Tantalum-nitride back-
contact)
Ordering Examples:
68AL-5002F is a 50 kilohm 1% resistor with nichrome metalization.
68ALT-75R0J is a 75 ohm 5% resistor with tantalum-nitride metalization.
68BCR-5R10K is a 5.1 ohm 10% back contact resistor with tantalum-nitride metalization
Availability and Limitations:
68AL & 68BCN series are available from 2 ohms to 500 kohms
68ALT & 68BCR series are available from 1 ohm to 250 kohms
B tolerance is available above 250 ohms
C tolerance is available above 100 ohms
D tolerance is available above 50 ohms
F tolerance is available above 25 ohms
G tolerance is available above 12 ohms
J tolerance is available above 5 ohms
SatCon Electronics also manufactures Custom Substrates on a
variety of materials, a wide range of Microwave, PIN Diode Drivers,
and Custom Hybrid Circuits. Please contact the factory or your local
SatCon Electronics representative for more information.
SatCon Electronics Inc.
Tel:508-485-6350 Fax : 508-485-5168
165 Cedar Hill Street, Marlborough, Ma 01752
www.satconelectronics.com
(Specifications subject to change without notice)