REMEC
Frequency Doubler
High Isolation, In-line Output
Electrical Specifications
Parameter
Insertion Loss:
(2)
Fundamental
Isolation:
(3)
Third Harmonic
Suppression:
(4)
Input VSWR:
Input Power:
(1)
Input 2.0 to 10.0 GHz
Output 4.0 to 20.0 GHz
:
Conditions
Input (GHz)
2.0-9.0
1.5-10.0
2.0-10.0
2.0-7.0
1.5-5.0
5.0-10.0
1.5-10.0
Output (GHz)
4.0-18.0
3.0-20.0
2.0-10.0
6.0-21.0
3.0-10.0
10.0-20.0
3.0-20.0
Min
Specifications
Typical
11.0 dB
11.5 dB
33 dB
33 dBc
2.2:1
1.75:1
+11 dBm
+17 dBm
Max
13.0 dB
15.0 dB
FD9xMS-1
Input Power
6 = +11 dBm
7 = +17 dBm
25 dB
20 dBc
FD96
FD97
Notes:
1. Specifications are guaranteed when tested
as a doubler in a 50 Ohm system at +25°C with nominal input power.
Specifications indicated as typical are not guaranteed.
2. Insertion loss typically degrades less than 0.5 dB at +100°C and improves less than 0.5 dB at -55°C.
3. Fundamental isolation is referenced to the fundamental input.
4. Third Harmonic Suppression is referenced to the second harmonic output.
FD9xMS-1
Outline: MSD1
Typical
Performance at
25°C
IN
OUT
All dimensions are in inches and [mm].
Specifications subject to change without notice.
1590 Buckeye Drive - Milpitas, CA 95035 - TEL: 408-432-9898 - FAX: 408-432-1551 - components@remec.com - www.remec.com
3-62
SPECTRUM [ SPECTRUM MICROWAVE, INC. ]
