REMEC
Voltage Controlled Oscillator
Electrical Specifications (1):
50 to 85 MHz
Parameter
Frequency Range
Power Output at 25°C (50 Ohm load)
Power Output Variation vs. Temperature
Frequency Drift vs. Temperature
(2)
Frequency Pulling (12 dB Return Loss)
Frequency Pushing
Tuning Voltage Limits
SSB Phase Noise (50 kHz offset)
Harmonics
(3)
Spurious
Bias Voltage
(4)
Bias Current
(5)
Operating Temperature
Specifications
50 to 85 MHz
+10 dBm, min.
±1.0 dB, typical
2.0 MHz, typical
2.0 MHz, typical
0.7 MHz/V, typical
0 to +15 VDC
-123 dBc/Hz, typical
-15 dBc, typical
-70 dBc, max.
-6.5 VDC ±1%
40 mA, typical
-55 to +100°C
HV16T-2
Outline: F1, TO-8
Notes:
1. Specifications guaranteed over the operating temperature range. Those specifications indicated as typical are not
guaranteed. Plots exemplify typical performance at +25°C
2. Total frequency drift over the full temperature range.
3. Worst case harmonics over the frequency range.
4. Alternate bias voltages available.
5. Lower bias current available.
6. Surface mount package available.
7. Military screening available.
Typical Performance at 25°C
Specifications subject to change without notice.
Broadband Wireless - 1590 Buckeye Drive - Milpitas, CA 95035 - TEL:408-432-9898 - FAX: 408-432-1551 - Email: sales@remec.com - www.remec.com