SHANGHAI SUNRISE ELECTRONICS CO., LTD.
5KP5.0 THRU 5KP110CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:50-110V
PEAK PULSE POWER: 5000W
FEATURES
• 5000W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to V
BR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
265
o
C/10S/9.5mm lead length at 5 lbs tension
TECHNICAL
SPECIFICATION
R-6
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
• Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25
o
C ambient temperature unless otherwise specified)
RATINGS
Peak power dissipation
Peak pulse reverse current
Steady state power dissipation
Peak forward surge current
(Note 1)
(Note 1)
(Note 2)
(Note 3)
SYMBOL
Pppm
Ippm
Pm(av)
I
FSM
V
F
VALUE
Minimum 5000
See Table
8.0
400
3.5
UNITS
W
A
W
A
V
Maximum instantaneous forward voltage at 100A
o
T
STG
,T
J
Operating junction and storage temperature range
-55 to + 175
C
Notes:
o
1. 10/1000µS waveform non-repetitive current pulse, and derated above Ta=25 C
2. Tl=75
o
C, lead length 9.5mm, Mounted on copper pad area of (20×20mm)
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types 5KP5.0 thru types 5KP110A
(e.g. 5KP7.5C,5KP110CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having V
WM
of 10 volts and less, the I
D
limit is doubled.
4. Electrical characteristics apply in both directions.
http://www.sse-diode.com