AD6C111-L
1 Form A
Solid State Relay
DESCRIPTION
The AD6C111-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. This device also includes current-
limiting circuitry. During increased load currents or transient current spikes, this circuitry acts to bring the current down, protecting
downstream components.
FEATURES
APPLICATIONS
•
•
•
•
•
•
High input-to-output isolation
Low input control power consumption
110mA maximum continuous load current
40 ohms maximum on-resistance
Long life/high reliability
Current limiting
•
•
•
•
•
Reed relay replacement
Meter reading systems
Medical equipment
Battery monitoring
Multiplexers
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
Storage Temperature
Operating Temperature
Continuous Input Current
Transient Input Current
Reverse Input Control
Voltage
Output Power Dissipation
UNIT
°C
°C
mA
mA
V
mW
6
800
MIN
-55
-40
TYP
MAX
125
85
40
400
•
•
-S
-TR
Surface Mount Option
Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
•
•
•
BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
CSA CERTIFICATE #LR111581-1
UL FILE #E90096
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6
AD6C111-L
rev 1.4 (10/25/04)
SSOUSA [ SOLID STATE OPTRONIC ]
