欢迎访问ic37.com |
会员登录 免费注册
发布采购

SST89E516RD2-40-C-TQJ 参数 Datasheet PDF下载

SST89E516RD2-40-C-TQJ图片预览
型号: SST89E516RD2-40-C-TQJ
PDF下载: 下载PDF文件 查看货源
内容描述: FlashFlex51 MCU [FlashFlex51 MCU]
分类和应用:
文件页数/大小: 91 页 / 969 K
品牌: SST [ SILICON STORAGE TECHNOLOGY, INC ]
 浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第2页浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第3页浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第4页浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第5页浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第6页浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第7页浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第8页浏览型号SST89E516RD2-40-C-TQJ的Datasheet PDF文件第9页  
FlashFlex51 MCU
SST89E52RD2 / SST89E54RD2 / SST89E58RD2 / SST89E516RD2
SST89V52RD2 / SST89V54RD2 / SST89V58RD2 / SST89V516RD2
SST89E/V516 / 58 / 54 / 52RD2 FlashFlex51 MCU
Preliminary Specifications
FEATURES:
• 8-bit 8051-Compatible Microcontroller (MCU)
with Embedded SuperFlash Memory
– Fully Software Compatible
– Development Toolset Compatible
– Pin-For-Pin Package Compatible
• SST89E5xxRD2 Operation
– 0 to 40 MHz at 5V
• SST89V5xxRD2 Operation
– 0 to 33 MHz at 3V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
– 8/16/32/64 KByte primary block +
8 KByte secondary block
(128-Byte sector size for both blocks)
– Individual Block Security Lock with SoftLock
– Concurrent Operation during
In-Application Programming (IAP)
– Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64
KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
– Framing Error Detection
– Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
– Four External Interrupt Inputs
• Programmable Watchdog Timer (WDT)
• Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and
One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an
option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
– Power-down Mode with External Interrupt Wake-up
– Idle Mode
• Temperature Ranges:
– Commercial (0°C to +70°C)
– Industrial (-40°C to +85°C)
• Packages Available
– 44-lead PLCC
– 40-pin PDIP (Port 4 feature not available)
– 44-lead TQFP
PRODUCT DESCRIPTION
The SST89E5xxRD2 and SST89V5xxRD2 are members
of the FlashFlex51 family of 8-bit microcontroller products
designed and manufactured with SST’s patented and pro-
prietary SuperFlash CMOS semiconductor process tech-
nology. The split-gate cell design and thick-oxide tunneling
injector offer significant cost and reliability benefits for SST’s
customers. The devices use the 8051 instruction set and
are pin-for-pin compatible with standard 8051 microcontrol-
ler devices.
The devices come with 16/24/40/72 KByte of on-chip flash
EEPROM program memory which is partitioned into 2
independent program memory blocks. The primary Block 0
occupies 8/16/32/64 KByte of internal program memory
space and the secondary Block 1 occupies 8 KByte of
internal program memory space.
The 8-KByte secondary block can be mapped to the lowest
location of the 8/16/32/64 KByte address space; it can also
be hidden from the program counter and used as an inde-
pendent EEPROM-like data memory.
In addition to the 16/24/40/72 KByte of EEPROM program
memory on-chip, the devices can address up to 64 KByte
of external program memory. In addition to 1024 x8 bits of
on-chip RAM, up to 64 KByte of external RAM can be
addressed.
The flash memory blocks can be programmed via a stan-
dard 87C5x OTP EPROM programmer fitted with a special
adapter and the firmware for SST’s devices. During power-
on reset, the devices can be configured as either a slave to
an external host for source code storage or a master to an
external host for an in-application programming (IAP) oper-
ation. The devices are designed to be programmed in-sys-
tem and in-application on the printed circuit board for
maximum flexibility. The devices are pre-programmed with
an example of the bootstrap loader in the memory, demon-
strating the initial user program code loading or subsequent
user code updating via the IAP operation. The sample
bootstrap loader is available for the user’s reference and
convenience only; SST does not guarantee its functionality
or usefulness. Chip-Erase or Block-Erase operations will
erase the pre-programmed sample code.
©2004 Silicon Storage Technology, Inc.
S71255-00-000
3/04
1
The SST logo, SuperFlash, and FlashFlex are registered trademarks of Silicon Storage Technology, Inc.
These specifications are subject to change without notice.