ST75185
MULTIPLE RS-232 DRIVERS AND RECEIVERS
s
s
s
s
MEETS AND EXCEEDS THE
REQUIREMENTS OF EIA/TIA-232-E AND
ITUV.28 STANDARD
SINGLE CHIP WITH EASY INTERFACE
BETWEEN UART AND SERIAL PORT
CONNECTOR OF IBM PC/AT
TM
AND
COMPATIBLES
DESIGNED TO SUPPORT DATA RATES UP
TO 120 Kbps
PINOUT COMPATIBLE WITH ST75C185
SOP
TSSOP
DESCRIPTION
The ST75185 contains three drivers and five
receivers. The pinout matches the DB9S
connector design in order to decrease the part
count, reduce the board space required and allow
easy interconnection of the UART and serial port
connector of IBM PC/AT
TM
and compatibles. The
bipolar circuits and processing of the ST75185
provides a rugged low-cost solution for this
function at the expense of quiescent power and
external passive components relative to the
ST75C185.
The ST75185 complies with the requirements of
the EIA/TIA 232-E and ITU (formally CCITT) v.28
standards. These standards are for data
interchange between a host computer and
peripheral at signalling rates up to 20k-bits/s. The
switching speeds of the ST75185 are fast enough
to support rates up to 120K-bits/s with lower
capacitive loads (shorter cables). Interoperability
at the higher signalling rates cannot be assured
ORDERING CODES
Type
ST75185CTR
ST75185CD
ST75185CDR
ST75185CPR
Temperature
Range
0
0
0
0
to 70
to 70
to 70
to 70
°C
°C
°C
°C
Package
SSOP
unless the designer has design control of the
cable and the interface circuits at the both ends.
For interoperability at signalling rates to 120
K-bits/s, use of EIA/ITA-423-B (ITU v.10) and EIA/
ITA-422-B
(ITU
v.11)
standards
are
recommended.
The ST75185 is characterized for operation over
the range of 0°C to 70°C.
Comments
2500 parts per reel
40 parts per tube / 25 tubes per box
1000 parts per reel
1350 parts per reel
TSSOP20 (Tape & Reel)
SO-20 (Tube)
SO-20 (Tape & Reel)
SSOP-20 (Tape & Reel)
December 2002
1/18
STMICROELECTRONICS [ STMICROELECTRONICS ]
