TDA2822
Figure 14 :
Application Circuit for Portable Radios.
MOUNTING INSTRUCTION
The R
th j-amb
of the TDA2822 can be reduced by sol-
dering the GND pins to a suitable copper area of the
printed circuit board (Figure 15) or to an external
heatsink (Figure 16).
The diagram of Figure 17 shows the maximum dis-
sipable power P
tot
and the R
th j-amb
as a function of
the side ”∂” oftwo equalsquare copperareas having
a thickness of 35
µ
(1.4 mils).
Figure 15 :
Example of P.C. Board Copper Area
which is used as Heatsink.
During soldering the pins temperature must not ex-
ceed 260
°C
and the soldering time must not be
longer than 12 seconds.
The external heatsink or printed circuit copper area
must be connected to electrical ground.
Figure 16 :
External Heatsink Mounting Example.
8/11