EMC&PFC Choke Coil<Pin Type: PFN Series>
Type: PFN2029
◆
Product Description
・¢30.0mm×35.5mm.MAX.
・Custom
design is available
◆
Feature
・Iron
dust core is used to realize better DC Saturation characteristics
and higher noise absorption effect.
・Less
leakage magnetic flux .
・Ideally
used as Normal Mode chokes EMI suppression in power supplies or signal lines.
・Ideally
used as Power Factor Correction choke
・Elimination
for impulse noise.
・RoHS
Compliance
φ30.0 MAX.
SOLDER
10.0
3 5 . 5
M A X .
◆
Dimensions (mm)
SOLDER
φ1.10 MAX.
ADHESIVE
16.0
21.0 MAX.
24.0 MAX.
◆
Specification (For EMC application)
Sample No.
PFN2Ø29NP-NM42A
PFN2Ø29NP-NM53A
Inductance
(μH) [MIN.]
At 1kHz
52
83
D.C.R.(mΩ)
[MAX.]
(at20℃)
30
38
Rated
Current
(A)※1
6.1
5.4
※
Rated current: The DC current at which the temperature rise is
△t=40℃.(Ta=20℃).
◆
Specification (For PFC application)
Sample No.
5342-T010
Inductance(μH)
At 1kHz
10.0±20%
D.C.R. (mΩ)
[MAX.] (at20℃)
8.5
Rated
Current (A)※
10.0
※
Rated current: The DC current at which the inductance decreases to 90 % of it’s initial value or
when
△t=40℃,
whichever is lower(Ta=20℃).
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1