Part Number:
ZMDKBBA70W
www.SunLED.com
3.0x2.5mm SURFACE MOUNT LED LAMP
Recommended Soldering Pattern
The device has a single mounting surface. The device
(Units : mm; Tolerance: ± 0.1)
must be mounted according to the specifications.
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 25, 2008
Drawing No : SDSA6306
V1
Checked : B.L.LIU
P.4/5