Part Number: ZMG77W
4.5x2mm SMD CHIP LED LAMP
www.SunLED.com
The device has a single mounting surface. The device
Recommended Soldering Pattern
must be mounted according to the specifications.
(Units : mm; Tolerance: ± 0.1)
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 26, 2008
Drawing No : SDSA3818
V4
Checked : B.L.LIU
P.3/4