Part Number:
ZTNI55W-3
www.SunLED.com
3.2x1.6mm INFRARED EMITTING DIODE
The device has a single mounting surface. The device
Recommended Soldering Pattern
must be mounted according to the specifications.
(Units : mm; Tolerance: ±0.1)
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage or radiant intensity/ luminous flux ),
the typical accuracy of the sorting process is as follows:
1. Radiant Intensity/ luminous flux: +/-15%
2. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 28,2008
Drawing No : SDSA3654
V6
Checked : B.L.LIU
P.3/4
SUNLED [ SUNLED CORPORATION ]
