欢迎访问ic37.com |
会员登录 免费注册
发布采购

HV513WG 参数 Datasheet PDF下载

HV513WG图片预览
型号: HV513WG
PDF下载: 下载PDF文件 查看货源
内容描述: 8通道串行到并行转换器与高压推挽输出, POL ,高阻和短路检测 [8-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs, POL, Hi-Z, and Short Circuit Detect]
分类和应用: 外围驱动器转换器驱动程序和接口接口集成电路光电二极管高压
文件页数/大小: 6 页 / 1991 K
品牌: SUPERTEX [ Supertex, Inc ]
 浏览型号HV513WG的Datasheet PDF文件第2页浏览型号HV513WG的Datasheet PDF文件第3页浏览型号HV513WG的Datasheet PDF文件第4页浏览型号HV513WG的Datasheet PDF文件第5页浏览型号HV513WG的Datasheet PDF文件第6页  
Supertex inc.
8-Channel Serial to Parallel Converter with High Voltage
Push-Pull Outputs, POL, Hi-Z, and Short Circuit Detect
Features
HVCMOS‚ technology
Operating output voltage of 250V
Low power level shifting from 5V to 250V
Shift register speed 8MHz @ V
DD
= 5V
8 latch data outputs
Output polarity and blanking
CMOS compatible inputs
Output short circuit detect
Output high-Z control
HV513
General Description
The HV513 is a low voltage serial to high voltage parallel
converter with 8 high voltage push-pull outputs. This device has
been designed to drive small capacitve loads such as piezoelec-
tric transducers. It can also be used in any application requiring
multiple high voltage outputs, with medium current source and
sink capabilities.
The device consists of an 8-bit shift register, 8 latches, and
control logic to perform the polarity select and blanking of the
outputs. Data is shifted through the shift register on the low to
high transition of the clock. A data output buffer is provided for
cascading devices. Operation of the shift register is not affected
by the LE, BL, POL, or the HI-Z control inputs. Transfer of data
from the shift register to the latch occurs when the LE is high. The
data in the latch is stored when LE is low. A high-Z, HI-Z, pin is
provided to set all the outputs in a high-Z state.
All outputs have short circuit protection that detects if the outputs
have reached the required output state. If output does not track
the required state, then the SHORT pin will be low. This output
will pulse low during the output transistion period under normal
operation; see SC Timing Diagram for details.
All outputs will have a break-before-make circuitry to reduce
cross-over current during output state changes.
The POL, BL, LE, and HI-Z inputs have an internal pull up
resistor.
Applications
Piezoelectric transducer driver
Weaving applications
Braille
Printers
MEMs
Displays
Application Diagram
Low Voltage
Power Supply
High Voltage
Power Supply
D
IN
CLK
LE
FPGA
BL
POL
HiZ
Supertex HV513
Low Voltage
Shift Register
Latches
Output
Controller
High Voltage
Level
Translators
&
Push-Pull
Output
Buffers
HV
OUT1
8
/
HV
OUT8
D
OUT
SHORT
Piezo
Element
D
IN
to the next HV513 for cascading the next
B032306
Supertex inc.
·
1235 Bordeaux Drive, Sunnyvale, CA 94089
·
Tel: (408) 222-8888
·
FAX: (408) 222-4895
·
www.supertex.com