INTELLIGENT INTERACTIVE SYNTHESIZER
SURFACE MOUNT MODEL:
LFSW35105-100
WIDE BANDWIDTH
FEATURES:
►
Exceptionally Low Phase Noise
►
Interactive Communication
►
Standard Programming Interface
►
Ultra Wide Tuning Range
►
Lead Free - RoHS Compliant
►
Patent Pending REL-PRO
®
Technology
►
Small Size, Surface Mount
►
Buffered Output
Phase Noise
-40
-50
-60
-70
Phase Noise (dBc/Hz)
350 - 1050 MHz
-80
-90
-100
-110
-120
-130
-140
-150
-160
-170
100
1000
10000
100000
1000000
10000000
Offset Frequency (Hz)
350.000 MHz / 15.2 dBm
700.000 MHz / 14.8 dBm
1050.00 MHz / 11.5 dBm
SPECIFICATIONS (Rev. F 08/07/07)
Frequency
Step Size
Reference
Input Frequency
Reference
Input Voltage
Bias Voltage
Output Power
Spurious Suppression
Harmonic Suppression
Settling Time
Output Impedance
Typical Phase Noise
350 - 1050 MHz
1000 kHz
10 MHz*
1 V p-p to 3.3 V p-p
Vcc
Digital
VCO
Converter
Analog
+10 dBm (Min.)
85 dB (Typ.)
20 dB (Typ.)
10 mSec (Typ.)**
50 Ohms
Offset
@ 1 kHz
@ 10 kHz
@ 100 kHz
V (Vdc)
+5
+5
+5
+5
I (mA Max.)
65
50
65
5
Package #
280LF
Phase Noise
-100 dbc/Hz
-102 dbc/Hz
-132 dbc/Hz
Operating
-30 to +75 °C
Temperature Range
Programming
See Application Note: AN7100
* Reference input frequency is programmable in multiples of the step size, 10 MHz
is the default setting with 150 MHz (Max.).
** From the rising edge of LE to stable lock detect.
Absolute Maximum Ratings
Storage Temp. Range
Bias Voltage (Digital)
Bias Voltage (VCO)
Bias Voltage (Converter)
Bias Voltage (Analog)
DC Voltage Applied to RF Out
-55 to +125 ºC
+5.25 V
+5.5 V
+8 V
+5.25 V
±25 V
Pin 6 - RF Out
Pin 8 - Ref In
Pin 9 - Vcc(VCO) ****
Pin 10 - Vcc(Converter) ****
Pin 12 - Lock Detect Out*
Pin 14 - Vcc(Tune) ***
Pin 16 - Vout(Converter) ***
Pin 25 - Latch Enable In
Pin 26 - Data In
Pin 27 - Error Flag
Pin 28 - Clock In
Pin 29 - Reset **
Pin 34 - Vcc(Digital) ****
Pin 36 - Vtune
Pin-Out
Pin 38 - Vcc(Analog) ****
Pin 19-22, 24, 30-33 - NC
All Others Ground
NC - No Connection
* High when locked (source/sink 500 uA)
** A low on this input will reset the internal controller. Leave unconnected for
normal operation.
*** Connect pins 14 and 16 together externally and add 10uF tantalum bypass
capacitor to ground.
**** Supply external filtering for pin 9, 10, 34 and 38