MQME-28-P
Current:
20 A
Technical Specification
20
0
10
1
-20
-40
-60
-80
-100
-120
0.1
0.01
0.001
-140
Common Mode
-160
Differential Mode
-180
0.01
0.1
1
10
100
1000
0.01
0.1
1
10
100
1000
10000
100000
Frequency (kHz)
Frequency (kHz)
Figure 1: Typical Common Mode and Differential Mode Attenuation
provided by the filter as a function of frequency. Both input lines are
connected to chassis ground through 50Ω resistors. The filter case is
also connected to chassis ground.
Figure 2: Typical Output Impedance (magnitude) of the filter looking
back into its output pins with the input pins connected to a source with
zero source impedance.
Figure 3: MIL-STD-461E Method CE101 Low Frequency Conducted
Emissions. Limit line (in red) is the ‘Submarine Applications DC
Curve’. Setup described on Page 7.
Figure 4: MIL-STD-461E Method CE102 High Frequency Conducted
Emissions. Limit line (in red) is the ‘Basic Curve’. Setup described on
Page 7.
Figure 5: MIL-STD-461E Method RE101 Low Frequency Radiated Emissions.
Limit line (in red) is the ‘Standard Curve’from MIL-STD-461C Method RE01,
which is more strict than all RE101 limits. Setup described on Page 7.
Figure 6: MIL-STD-461E Method RE102 High Frequency Radiated
Emissions. Limit line (in red) is the ‘Submarine External to Pressure
Hull Curve’. Setup described on Page 7.
Product # MQME-28-P
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2ME028P Rev. A
5/1/08
Page 5
SYNQOR [ SYNQOR WORLDWIDE HEADQUARTERS ]
