RP12/24ADA
ADA Strobe
Retrofit Plate
A Division of Pittway
3825 Ohio Avenue, St. Charles, IL 60174
1-800-SENSOR2 (736-7672), Fax 630-377-6495
http://www.systemsensor.com
Models Available
RP2415ADA
RP241575ADA
RP2475ADA
RP24110ADA
RP1215ADA
RP121575ADA
Features
• Fits most 4″ or 5″ square horn or speaker
• Multiple light intensities
–24 VDC: 15,15/75, 75 or 110 cd models
–12 VDC: 15 or 15/75 cd models
• Low strobe current draw. 93 mA on the RP241575ADA
with regulated power
• Low installed cost
• No measurable strobe in-rush in excess of peak current
• Intended for primary signaling
• “Installer Easy”
–Plug-in terminal strip
–Wire strip guage and wiring
diagram on back
• Wall mount only
System Sensor RP12/24ADA
Series Strobe Retrofit
Plate complies with the
Americans with Disabilities Act
(ADA)
and the demanding requirements of the
UL 1971
Standard for the Hearing Impaired.
The 15/75 version is
UL 1971 listed at 15 cd.
The new model RP12/24ADA Series Retrofit Plate
allows adding an ADA compliant visible notification to
most existing 4 or 5 inch square horns or speakers. To
insure compliance with ADA and UL 1971, use the System
Sensor 75 candela models for non-sleeping areas, and the
110 candela models for sleeping areas.
Available in red only at 12 or 24 VDC, the RP12/
24ADA Series Strobe Retrofit Plate can be mounted
directly to a standard 4″ backbox.
Specifications
Input terminals:
Shipping Weight:
RP12/24ADA
Series Strobes:
Operating
Temperature Range:
Mounting:
Surface:
Semiflush:
18 – 12 AWG
Dimensions:
5
7
/
8
″
3″
14 oz. (397g)
32° F to 120° F (0° C to 49° C)
4″
×
4″
×
1
1
/
2
″
standard backbox
(2
1
/
8
″
recommended)
4″
×
4″
×
1
1
/
2
″
standard backbox
(2
1
/
8
″
recommended)
7
3
/
4
″
APPROVED
© System Sensor 8/96
This document is not intended to be used for installation purposes.
A05-249-01
SYSTEMSENSOR [ SYSTEMSENSOR ADVANCED IDEAS. ]
