A U D I B L E / V I S I B L E
N O T I F I C A T I O N
SpectrAlert SP2C Series
Ceiling Mount Speaker/
SP2C Series Ceiling
Strobes
Mount Speaker/Strobes
™
Models Available
Speaker/Strobe Models
SP2C2415
SP2C241575
SP2C2430
SP2C2475
SP2C2495
SP2C24115
SP2C24177
Accessory Back Box Skirt
BBSCW
Product Overview
Combines SpectrAlert ceiling mount
strobe and speaker technology
– Low current draw
– Fidelity sound quality
24 volt models available with 15, 15/75,
30, 75, 95, 115, and 177 candela
strobes
25.0 and 70.7 volt speaker with four
field-selectable power taps
Ceiling-specific shape, profile, and
aesthetics
Strobe is synchronizable with MDL
Sync•Circuit
™
module
Mounts to 4
″
x4
″
x2
1
/
8
″
back box
without an extension ring
Round shape offers greater placement
flexibility
System Sensor’s SpectrAlert
®
SP2C series ceiling speaker/strobes represent the
combination of leading-edge strobe and speaker technology with a design specifically
intended for ceiling mount applications.
Technology.
SpectrAlert SP2C ceiling speaker/strobes combine the low current
SP2C241575
Standard Application
BBSCW
Form C Relay
Auxiliar y
draw of the ceiling mount SpectrAlert strobes, with the intelligible, fidelity
sound quality of the SpectrAlert SP200 series evacuation speaker.
Flexibility.
Like all SpectrAlert products, the SP2C series ceiling speaker/strobes
feature the flexibility to meet a wide variety of applications. The 24 volt strobe
is available in seven different candelas, including 177 candela for sleeping areas.
The speaker offers field-selectable 25.0/70.7 voltage and
1
⁄
4
,
1
⁄
2
, 1, and 2 watt
power taps.
Aesthetics.
The SP2C ceiling speaker/strobes offer a design that is sensitive to
the aesthetic demands of ceiling mount applications. The round shape maintains
a low profile appearance, similar to that of a smoke detector. Its stylish curves
and design further refine the aesthetics over other generic wall/ceiling mount
designs. Yet SpectrAlert’s round shape provides clearly visible “FIRE” identifica-
tion from all angles.
Installation.
The SP2C ceiling speaker/strobes include several features to simplify
installation. By incorporating the SP200 series speaker, the entire unit may be
mounted to a 4″×4″×2
1
/
8
″
back box, without the need for an extension ring. An
optional back box skirt is also available for surface-mount applications. And
with SpectrAlert’s round shape, it is not necessary to align the back box with
the room’s walls. SpectrAlert always lines up.
Engineering Specifications
S4048
7320-1209:200
63-00-E
Ceiling speaker/strobe shall be a System Sensor Model __________ listed to
UL1480 and UL 1971 and be approved for fire protective signaling systems.
Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms, and
shall have a frequency range of 400 to 4000 Hz. Speaker shall have power
taps which are selected by shunts. The strobe shall comply with the NFPA72
requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s
entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system.
SYSTEMSENSOR [ SYSTEMSENSOR ADVANCED IDEAS. ]
