RELIABILITY DATAꢀ
2/4
Specifled Value
12.Adhesion of terminal
Item
BRC1608, BRL2012, BRC2016,
Test Method and Remarks
electrode
NRH24, NR30/40/60/80,
NRG40 Type
BRL2518, BRL3225
NR10050 Type
Type
Shall not come off PC board.
BRC1608,BRL2012,BRC2016,BRL2518,
BRL3225Type, NRH24, NR30/40/60/80, NRG40Type:
The test samples shall be soldered to the test board by
the reflow.
pplied force:10N to X and Y directions. Duration:5s.
Solder cream thickness:0.15mm.
5
10N, 5s
NR10050Type:
Applied force:5N to X and Y directions. Duration:5s.
Inductance change:Within±10%
BRC1608,BRL2012,BRC2016,BRL2518,
BRL3225Type, NRH24, NR30/40/60/80, NRG40Type,
NR10050Type:
13.Resistance to vibration
No significant abnormality in appearance.
The test samples shall be soldered to the test board by
the reflow.
Then it shall be submitted to below test conditions.
Frequency Range 10~55Hz
1.5mm(May not exceed
Total Amplitude
acceleration 196 m/S2)
Sweeping Method 10Hz to 55Hz to 10 Hz for 1 min.
X
For 2 hours on each X,
Time
Y
Z
Y, and Z axis.
Recovery:At least 2hrs of recovery under the standard con-
dition sfter the test, followed by the measurement within 48 hrs.
14.Solderability
BRC1608,BRL2012,BRC2016,BRL2518,
BRL3225Type, NRH24, NR30/40/60/80, NRG40Type,
NR10050Type:
At least 90%of surface of terminal electrode is
covered by new solder.
The test samples shall be dipped in flux, and then im-
mersed in molten solder as shown in below tableꢀ
Flux:Methanol solution containing rosin 25%.
NRH24, NR30/40/60/80Type,NR10050 Type :
Solder Temperature
Time
245±5℃
5±1.0sec
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type:
Solder Temperature
Time
245±5℃
5±0.5sec
※Immersion depth:All sides of mounting terminal shall
be immersed.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
369
△
△