■
RELIABILITY DATA
8. Resistance to flexure of substrate
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
No damage.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test
Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board
reaches to 2 mm.
Force Rod
20
10
Test board size
: 100×40×1.0
R230
Test board material
: glass epoxy-resin
Solder cream thickness : 0.12 (BR Series)
Board
0.10 (NR30/40, NRV30, NRH24/30,NRG40)
Test Sample
R5
0.15 (NR50/60/80, NRS50/60)
45±2mm
45±2mm
Land dimension BRC1608）
（
0.9
0.55 0.8 0.55
Land dimension BRL2012）
（
Land dimension BRL3225）
（
2.7
1.0
1.6
1.0
Land dimension NR30, NRH30, NRV30）
（
2.7
0.8 1.4 0.8
Land dimension NR60, NRS60）
（
5.7
1.6 3.1 1.6
Land dimension NR, NRS50）
（
4.0
1.5 2.1 1.5
1.4
0.65 0.9 0.65
Land dimension
Ｂ Ｃ2016）
（ Ｒ
1.8
0.7 0.8 0.7
Land dimension BRL2518,BRC2518,BRFL2518） Land dimension NRH24）
（
（
1.95
0.65 1.5 0.65
0.7 0.75 0.7
2.0
Land dimension NR40, NRG40）
（
3.7
1.2 1.6 1.2
Land dimension NR80）
（
7.5
1.8 3.8 1.8
Printed board thickness : 1.0mm
Unit : mm
9. Insulation resistance : between wires
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
10. Insulation resistance : between wire and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
11. Withstanding voltage : between wires and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
12. Adhesion of terminal electrode
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
Shall not come off PC board.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test
Method and Remarks】
BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow.
・
Applied force
: 10N to X and Y directions.
・
Duration
: 5s.
10N, 5s
・
Solder cream thickness : 0.15mm.
BRC1608, NR10050 Type :
・
Applied force : 5N to X and Y directions.
・
Duration
: 5s.
13. Resistance to vibration
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within
±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test
Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range
Total Amplitude
Sweeping Method
Time
10∼55Hz
1.5mm (May not exceed acceleration 196m/s
2
)
10Hz to 55Hz to 10Hz for 1min.
X
Y
For 2 hours on each X, Y, and Z axis.
Z
Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.
＊
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
1
wound0407_reli-RP2
TAIYO-YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
