■
PACKAGING
①Minimum
Packing Unit (Plastic Bag)
Item
PAS0815
PAS1016
PAS1020
PAS1220
PAS1235
PAS1840
180
250
Minimum
Packing
Unit
200
200
100
100
50
10
Standard Inner
Packing Box
quantity
10bags
2000
10bags
2000
15bags
1500
10bags
1000
10bags
500
20bags
200
Standard Inner Packing Box
200mm(W)×330mm(L)×140mm(H)
■
RELIABILITY DATA
Specifications
LR Series
LA Series
1. Operating Temperature range
－25½＋60℃
2.3V
3.0V
2. Max. Usable Voltage
2.3V
Capacitance
: Over 70% of initial spec.
3. Floating Charge Characteristics Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
Capacitance
: Over 70% of initial spec.
4. Charge/Discharge Cycle
Internal Resistance : Within 4 times of initial spec.
Characteristics
Appearance
: No noticeable abnormality
Capacitance
: Within initial spec.
5. Thermal Durability
Internal Resistance : Within initial spec.
Appearance
: No noticeable abnormality
Capacitance
: Within initial spec.
6. Humidity Durability
Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
No exterior abnormality observed :
7. Impact Durability
initial spec. values retained
No exterior abnormality observed :
8. Vibration Durability
initial spec. values retained
Items
9. Solder Heat Resistance
Capacitance
: Within initial spec.
Internal Resistance : Within initial spec.
Appearance
: No noticeable abnormality
Test Conditions, Remark
Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp.
and measure the floating charge characteristics after returning to normal tem-
perature and humidity.
Measure the charge/discharge cycle characteristics after 10000 charge/discharge
cycle at 25±5℃ with under mentioned charge/discharge cycle test condition for
each parts.
Leave the capacitor in an atmosphere of 60℃±2℃ and
ー25±2℃
consecutively
for 96 hours each, and return to normal temperature and humidity.
Temperature : 40±2℃, Humidity : 90½95%RH Leave the capacitor for 500 hours,
and return to normal temperature and humidity.
Accorging to JIS C 0041
Sine half wave A=294
Apply a sine wave vibration of 1.5mm amplitude and frequency 10½55Hz,
for 2 hours per each direction (X, Y and Z), total 6 hours.
Material
: Sn-3Ag-0.5Cu
Solder bath temperature : 260±5℃
Dipping time : 10±1 sec.
Dipping depth : 1.5½2mm from cell body
◦
Charge/Discharge Cycle Test Condition
Part Number
Charging Voltage (V)
Charging Time (s)
Max. Charging Current (A)
Discharging Current (A)
Cut off Voltage (V)
PAS0815
LR2R3105
2.3
10
1
1
1.5
PAS1016
LR2R3205
2.3
10
1
1
1.5
PAS0815
LA2R3185
2.3
10
1
1
1.5
PAS1020
LA2R3475
2.3
10
1
1
1.5
PAS1220
LA2R3106
2.3
10
1
1
1.5
PAS1235
LA2R3226
2.3
10
1
1
1.5
PAS1840
LA2R3566
2.3
30
5
5
1.5
PAS1020
LA3R0405
3.0
30
2
0.5
1.5
PAS1220
LA3R0905
3.0
30
3
1.0
1.5
PAS1235
LA3R0206
3.0
30
5
1
1.5
PAS1840
LA3R0506
3.0
30
10
2
1.5
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
cap02_reli-RP1
1
2
cap02_reli_e-01
TAIYO-YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
