Measuring frequency
Test Methods and
Remarks
Measuring voltage
Bias application
:
:
:
:
:
:
:
:
:
1MHz±10％
1kHz±10％
1kHz±10％
120Hz±10％
1.0±0.5Vrms
1.0±0.2Vrms
1.0±0.2Vrms
0.5±0.1Vrms
None
10000000pF
Rate voltage : 50VDC
10000pF½100000pF
220000pF½470000pF
1000000pF
（Class1 : C≦1000pF）
（Class1 : C＞1000pF）
（Class2 : C≦10μF）
（Class2 : C＞10μF）
（Class1 : C≦1000pF）
（Class1 : C＞1000pF）
（Class2 : C≦10μF）
（Class2 : C＞10μF）
: 17.5% max
: 7.5% max
: 10.0% max
: 15.0% max
８．Capacitance：Change due to Temperature or Rate of Capacitance Change
When voltage is not applied
Class1（Temperature
Compensating）
Specified Value
Class2（High Dielectric）
Multilayer type
Multilayer type
（Characteristics：B, B5）
CH : 0±60
SL : －350½＋1000 [ppm/℃]
±10%（B5 : ±15%）
Test Methods and
Remarks
Multilayer type
＋30/－85 %
（Characteristics：F）
Measurement of capacitance at 20℃ and 85℃, －25℃ shall be made to calculate temperature characteristic by the following equation.
（Class 1）
（C
85
－C
20
）
×10
6
（ppm/℃）
C
20
×△T
Change of maximum capacitance deviation in step 1 to 5（Class2）
Step
Temperature（℃）
1
20
2
－25
3
20（Reference temperature）
4
85
5
20
※In the B5 characteristics is, the Temperatures of step 1,3, and 5 are 25℃.
9．Terminal Strength
Tensile
Class1（Temperature
Compensating）
Specified Value
Class2（High Dielectric）
Multilayer type
Multilayer type
（Characteristics：B, B5）
Multilayer type
（Characteristics：F）
No abnomalities, such as cuts or looseness of terminals.
Test Methods and
Remarks
Torsional
Apply the stated tensile force progressively in the direction to draw terminal.
Nominal wire diameter［mm½
Tensile force［N½
Duration［s½
0.45・0.55
19.6
5
Class1（Temperature
Compensating）
Specified Value
Class2（High Dielectric）
Multilayer type
Multilayer type
（Characteristics：B, B5）
No abnomalities, such as cuts or looseness of terminals.
Test Methods and
Remarks
Multilayer type
（Characteristics：F）
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position.
This operation is done over a period of 5 sec. Then second bend in the opposite direction shall be made.
Number of bends : 2 times
Nominal wire diameter［mm½
Bending force［N½
Mass weight［kg½
0.45・0.55
2.45
0.25
10．Resistance to Vibration
Specified Value
Class1（Temperature
Compensating）
Multilayer type
Appearance ： No significant abnomality
Withstanding Voltage ： No abnomality
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
TAIYO-YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
