CC1110Fx / CC1111Fx
Parameter
Active mode with
radio in TX,
433 MHz
33.5
20
19
Active mode with
radio in TX,
868, 915 MHz
36.2
21
20
Power mode 0
Power mode 1
4.3
220
mA
mA
mA
mA
µA
mA
mA
mA
Min
Typ
Max
Unit
Condition
System clock running at 26 MHz or 24MHz.
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode
+10 dBm output power (PA_TABLE0=0xC0)
0 dBm output power (PA_TABLE0=0x60)
-6 dBm output power (PA_TABLE0=0x2A)
System clock running at 26 MHz or 24MHz.
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode
+10 dBm output power (PA_TABLE0=0xC2). See Table 7 for typical
variation over operating conditions
0 dBm output power (PA_TABLE0=0x50)
-6 dBm output power (PA_TABLE0=0x2B)
Same as active mode, but the CPU is not running (see 13.1.2.2 for
details). System clock at 26 MHz or 24MHz
Digital regulator on. HS RCOSC and high speed crystal oscillator off.
32.768 kHz XOSC or low power RCOSC running (see 13.1.2.3 for
details)
Digital regulator off. HS RCOSC and high speed crystal oscillator off.
Low power RCOSC running (see 13.1.2.4 for details)
Digital regulator off. No crystal oscillators or RC oscillators are
running (see 13.1.2.5 for details)
Add to the figures above if the peripheral unit is activated
Power mode 2
Power mode 3
Peripheral
Current
Consumption
Timer 1
Timer 2
Timer 3
Timer 4
ADC
0.5
0.3
1.0
µA
µA
2.7
1.3
1.6
2
1.2
µA/MHz
µA/MHz
µA/MHz
µA/MHz
mA
When running
When running
When running
When running
When converting
Table 6: Current Consumption
SWRS033E
Page 12 of 239
TAOS [ TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS ]
