C2510Fx / CC2511Fx
•
Clock source for ultra-low power
operation can be either a low-power RC
oscillator or an optional 32.768 kHz
crystal oscillator
•
Very fast transition to active mode from
power modes enables ultra low average
power consumption in low duty-cycle
systems
3.8
2.4 GHz Radio with Baseband Modem
•
Based on the industry leading
CC2500
radio core
•
Few external components: On-chip
frequency synthesizer, no external filters
or RF switch needed
•
Flexible support for packet oriented
systems: On-chip support for sync word
detection, address check, flexible packet
length, and automatic CRC handling
•
Supports use of DMA for both RX and
TX resulting in minimal CPU intervention
even on high data rates
•
Programmable channel filter bandwidth
•
2-FSK, GFSK and MSK supported
•
Optional automatic whitening and de-
whitening of data
•
Programmable
indicator
Carrier
Sense
(CS)
•
Programmable
Preamble
Quality
Indicator for detecting preambles and
improved protection against sync word
detection in random noise
•
Support for automatic Clear Channel
Assessment (CCA) before transmitting
(for listen-before-talk systems
•
Support for per-package Link Quality
Indication (LQI)
•
Suited for systems targeting compliance
with EN 300 328, EN 300 440, FCC
CFR47 Part 15 and ARIB STD-T-66
•
When transmitting in band 2480-
2483.5MHz under FCC, duty-cycling or
reducing output power might be needed
SWRS055D
Page 7 of 243
TAOS [ TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS ]
