73S8014RN Data Sheet
DS_8014RN_014
2 Electrical Specifications
This section provides the following:
Absolute maximum ratings
Recommended operating conditions
Package thermal parameters
Smart card interface requirements
Digital signals characteristics
DC Characteristics
Voltage Fault Detection Circuits
2.1 Absolute Maximum Ratings
Table 2 lists the maximum operating conditions for the 73S8014RN. Permanent device damage may occur if
absolute maximum ratings are exceeded. Exposure to the extremes of the absolute maximum rating for extended
periods may affect device reliability. The smart card interface pins are protected against short circuits to VCC,
ground, and each other.
Table 2: Absolute Maximum Device Ratings
Parameter
Rating
Supply Voltage VDD
-0.5 to 6.0 VDC
-0.5 to 6.0 VDC
-0.3 to (VDD +0.5) VDC
-60 to 150°C
Supply Voltage VPC
Input Voltage for Digital Inputs
Storage Temperature
Pin Voltage (except card interface)
Pin Voltage (card interface)
ESD Tolerance – Card interface pins
ESD Tolerance – Other pins
-0.3 to (VDD +0.5) VDC
-0.3 to (VCC + 0.5) VDC
+/- 6kV
+/- 2kV
* Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.
2.2 Recommended Operating Conditions
Function operation should be restricted to the recommended operating conditions specified in Table 3.
Table 3: Recommended Operating Conditions
Parameter
Rating
Supply Voltage VDD
2.7 to 5.5 VDC
4.75 to 5.5 VDC
-40°C to +85°C
0V to VDD + 0.3V
Supply Voltage VPC
Ambient Operating Temperature
Input Voltage for Digital Inputs
2.3 Package Thermal Parameters
Error! Reference source not found. lists the 73S8014RN Smart Card package thermal parameters.
Table 4: Package Thermal Parameters
Parameter
Rating
20 SO
50°C / W
8
Rev. 1.0
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
