Data Sheet:
F-xASI/SDI-Tx/Rx
The F-xASI/SDI is a copper to fiber
media adapter for either DVB-ASI or
SD-SDI signals. The unit has up to
eight channels that work independently
of each other. Each channel can carry
either a DVB-ASI signal or an SD-SDI signal. Up to eight channels are then multiplexed onto a single
fiber for transport. Our units employ CWDM technology for optical multiplexing. Based on users needs
a variety of wavelenghts can be used for the transmitter optics. All transmittion signals are multiplexed
onto a single fiber for transport. The signals are then separated at the receiver. The F-xASI/SDI
provides up to 8 independent DVB-ASI/SDI pipes. There are BNC connectors for the copper inputs
and outputs. The optical connections can be configured for SC, SC(APC), ST, or FC connectors. The
F-xASI/SDI features easy to read diagnostic LED's for system and link status.
Typical L-xASI/SDI-Rx/Tx Application
ASI or SDI Out
Up to 120Km Singlemode Fiber
Power Consumption
Power Connection
Optical Connector
Copper Connections
Dimensions (H x W x D)
Weight
Operating Temp. ( )
Storage Temp. ( )
Operating Humidity (%)
Storage Humidity (%)
Regulatory Compliance
ASI or SDI In
Technical Specifications
Applications:
SMPTE 259M, SDI or D1
SMPTE 31 OM, MPEG2
SMPTE 305 540 Mbps
HDTV
Video On Demand TS
MPEG Encoder
DVB-ASI
ASI 0.5Mbps – 622Mbps
1310 – 1550 nm FP/DFB
6.0 dbm
24 – 32 dB
40 dB
8W
110-240 V Auto Sense
SC/APC or by request
BNC, 75 ohm
19in x 11.0in x 1.75in
480mmX225mmX44mm
0.75 Kg
0 to +50 ( )
-20 to +70 ( )
0 to 90 %
0 to 90 %
FCC Part 15 Class A
CE, UL, CUL, TUV
Optical Wavelength
Optical Output Power
Optical Budget loss
Optical Return Loss
Data Sheet: F-xASI/SDI-Tx/Rx
www.thorfiber.com