欢迎访问ic37.com |
会员登录 免费注册
发布采购

T63H0001A-AX 参数 Datasheet PDF下载

T63H0001A-AX图片预览
型号: T63H0001A-AX
PDF下载: 下载PDF文件 查看货源
内容描述: 锂离子电池保护器 [Li-Ion Battery Protector]
分类和应用: 电池
文件页数/大小: 7 页 / 57 K
品牌: TMT [ TAIWAN MEMORY TECHNOLOGY ]
 浏览型号T63H0001A-AX的Datasheet PDF文件第2页浏览型号T63H0001A-AX的Datasheet PDF文件第3页浏览型号T63H0001A-AX的Datasheet PDF文件第4页浏览型号T63H0001A-AX的Datasheet PDF文件第5页浏览型号T63H0001A-AX的Datasheet PDF文件第6页浏览型号T63H0001A-AX的Datasheet PDF文件第7页  
tm
TE
CH
T63H0001A
T63H0001A
Features
Low supply current
Supply current
Li-Ion Battery Protector
TYP. 5.0uA
Standby current (after detecting over-discharge) TYP. 0.3uA
High withstand voltage
High accuracy detector
Threshold
Variety of detector threshold
Absolute maximum ratings
Over-charge detector
Over-discharge detector
Over-charge detector threshold
Over-discharge detector threshold
Built in protection circuit
Output delay of over charge
Excess current trip/Short circuit protector
Time delay at C3=0.01uF & VDD=4.3V
170Ms
note1
20V(VDD-VM)
+/- 25mV
+/- 2.5%
4.0V to 4.4V
2.4V to 3.0V
note1: The result was measured from T63H0001A-AX.
Part Number Examples
Over charge detection
Part No.
voltage
T63H0001A-AX
T63H0001A-BX
T63H0001A-CX
*note1
4.25V
4.35V
4.30V
….
voltage
4.05V
4.15V
4.10V
….
001A
001B
001C
SOT-23-6
SOT-23-6
SOT-23-6
….
Over charge release
marking
Pack type
note1: New model version and specific characteristics may be order by customer.
General Description
The T63H0001A series are protection ICs for
over-charge/discharge of rechargeable one-cell
Lithium-ion (Li+) batteries by CMOS process.
The T63H0001A series can detect
over-charge/discharge of Li+ one-cell and
excess load current, further include a short
circuit protector for preventing large external
short circuit current.
Each of these ICs is composed of three voltage
detectors, a reference unit, a hysteresis circuit,
and a short circuit protector. When charging
voltage crosses the detector threshold from a
low value to a value higher than Vdet1, the
output of Cout pin, the output of over-charge
detector/VD1, switches to low level. …
charger’s negative pin level. After detecting
over-charge the VD1 can be reset and the output
of Cout pin becomes “H” when the VDD
voltage is coming down to a level lower than
“Vdet1-Vhys1”, or when a charger is
disconnected from the battery pack while the
Publication Date: MAR. 2004
Revision:A
TM Technology Inc. reserves the right
P. 1
to change products or specifications without notice.