欢迎访问ic37.com |
会员登录 免费注册
发布采购

T63H0002A-CX 参数 Datasheet PDF下载

T63H0002A-CX图片预览
型号: T63H0002A-CX
PDF下载: 下载PDF文件 查看货源
内容描述: [T63H0002A]
分类和应用:
文件页数/大小: 8 页 / 167 K
品牌: TMT [ TAIWAN MEMORY TECHNOLOGY ]
 浏览型号T63H0002A-CX的Datasheet PDF文件第2页浏览型号T63H0002A-CX的Datasheet PDF文件第3页浏览型号T63H0002A-CX的Datasheet PDF文件第4页浏览型号T63H0002A-CX的Datasheet PDF文件第5页浏览型号T63H0002A-CX的Datasheet PDF文件第6页浏览型号T63H0002A-CX的Datasheet PDF文件第7页浏览型号T63H0002A-CX的Datasheet PDF文件第8页  
tm
TE
CH
T63H0002A
T63H0002A
Features
Low supply current
High accuracy detector
Threshold
Variety of detector threshold
Built in protection circuit
Output delay of over charge
Output delay of over-discharg
Small package
note1: The result was measured from T63H0002A-AX
Supply current
Li-Ion Battery Protector
TYP. 5.0uA
TYP. 0.3uA
+/- 25mV
+/- 30mV
+/- 2.5%
4.0V to 4.4V step of 0.005V
2.0V to 3.0V step of 0.005V
0.04V to 0.32V step of 0.04V
±15%
170mS
note1
10mS
SOT23-6/6-pin
Standby current (after detecting over-discharge)
Over-charge detector(Topt=25ºC)
Over-charge detector (Topt=0 to 50ºC)
Over-discharge detector
Over-charge detector threshold
Over-discharge detector threshold
Excess current protection
Accuracy
Time delay at C3=0.01uF & VDD=4.3V
VDD=2.4V with built-in capacitor
Part Number Examples
Part No.
T63H0002A-AX
T63H0002A-BX
T63H0002A-CX
T63H0002A-DX
*note1
Over charge detection
voltage
4.25V
4.35V
4.30V
4.28V
….
Over charge release
voltage
4.05V
4.15V
4.10V
4.08V
….
marking
002A
002B
002C
002D
Pack type
SOT-23-6
SOT-23-6
SOT-23-6
SOT-23-6
….
note1: New model version and specific
characteristics may be order by customer.
General Description
The T63H0002A is protection IC for
over-charge/discharge of rechargeable one-cell
Lithium-ion(Li+) excess load current, further
include a short circuit protector for preventing
large external short circuit current.
Each of these IC is composed of three
voltage detectors, a reference unit, a delay
circuit, a short circuit protector, and a logic
circuit. When charging voltage crosses the
detector threshold from a low value to value
TM Technology Inc. reserves the right
P. 1
to change products or specifications without notice.
higher than VDET1, the output of Cout pin, the
output of over-charge detector/VD1, switches to
low level, charger’s negative pin level. After
detecting over-charge the VD1 can be reset and
the output of Cout becomes high when the VDD
voltage is coming down to a level lower than
“VREL1”, or when a kind of loading is
connected to VDD after a charger is
disconnected from the battery pack while the
VDD level is in between “VDET1” and
Publication Date: JUL. 2002
Revision:A