XC6209 Series
High Speed LDO Regulators, Low ESR Cap. Compatible, Output On/Off Control
! PIN CONFIGURATION
VIN
4
VOUT VSS
VOUT
5
(NC)
4
2
CE 6
VSS 5
NC 4
1 VIN
2 NC
3 VOUT
1
2
3
3
CE
1
NC
2
VSS
VIN VSS CE
SOT-25 (TOP VIEW)
SOT-89 (TOP VIEW)
USP-6B (BOTTOM VIEW)
*Please do not connect a heat dissipation pad to
the circuitry. If the pad needs to be connected to
the circuitry, it should be connected to the VSS
pin.
! PIN ASSIGNMENT
PIN NUMBER
PIN NAME
FUNCTION
SOT-25
SOT-89-5
USP-6B
1
5
VIN
VSS
CE
Input
Ground
1
2
3
4
5
4
2
3
1
5
6
ON/OFF Control
No Connection
Output
2, 4
3
NC
VOUT
! SELECTION GUIDE
The following options for the CE pin logic and internal pull-up/down are available:
High Active + no pull-down resistor built-in (standard)
High Active + 2.0MΩ pull-down resistor built-in <between CE-VSS> (semi-custom)
Low Active + no pull-up resistor built-in (semi-custom)
Low Active + 2.0MΩ pull-up resistor built-in <between VIN-CE> (semi-custom)
Note: *With the pull-up resistor or pull-down resistor built-in types, the supply current during operation will increase by VIN / 2.0MΩ (TYP.).
! ORDERING INFORMATION
XC6209123456
DESIGNATOR SYMBOL
DESCRIPTION
DESIGNATOR SYMBOL
DESCRIPTION
High Active
(pull-down resistor built in, semi-custom)
Output Voltage : 100mV Step
Accuracy : within ±2% (*Note2)
e.g. 2=2, 3=8, 4=2 ⇒ 2.80V
A / E
2
High Active
(no pull-down resistor built in, standard)
B / F
4
Output Voltage : 50mV Step
Accuracy : within ±2% (*Note 2)
e.g. 2=2, 3=8, 4=A ⇒ 2.85V
1
(*Note1)
A
Low Active
(pull-up resistor built in, semi-custom)
C / G
D / H
M
Package Type :
SOT-25
SOT-89
USP - 6B
Active 'Low'
(no pull-up resistor built in, stanard)
P
D
5
6
Output Voltage :
Device Orientation :
Integer
R
L
2
3
e.g. 3.0V = 2: 3, 3: 0
Embossed Tape : Standard Feed
Embossed Tape : Reverse Feed
(Note 1) Maximum output current of the XC6209E ~ H series depend on the setting voltage.
(Note 2) Within ± 30mV (VOUT<1.5V)
Semiconductor Ltd.
Data Sheet
2