TOTAL POWER INT'L
600W Single Output Power Supply
Features :
High power density 4.9w/in
SE-600
3
series
AC input active surge current limiting
AC input range selected by switch
Protections:Short circuit/Over load/Over voltage/Over temperature
Forced air cooling by built-in DC fan
Built-in remote sense function
UL approved
Low cost
2 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
SE-600-5
5V
100A
0 ~ 100A
500W
SE-600-12
12V
50A
0 ~ 50A
600W
150mVp-p
SE-600-15
15V
40A
0 ~ 40A
600W
150mVp-p
13.5 ~ 16.5V
SE-600-24
24V
25A
0 ~ 25A
600W
150mVp-p
22 ~ 26.4V
SE-600-27
27V
22.2A
0 ~ 22.2A
599.4W
150mVp-p
24 ~ 30V
SE-600-48
48V
12.5A
0 ~ 12.5A
600W
200mVp-p
43 ~ 56V
1.0%
0.5%
0.5%
RIPPLE & NOISE (max.)
Note.2
150mVp-p
VOLTAGE ADJ. RANGE
4.75 ~ 5.5V
VOLTAGE TOLERANCE
Note.3
2.0%
LINE REGULATION
LOAD REGULATION
SETUP, RISE, HOLD TIME
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT
OVER LOAD
PROTECTION
OVER VOLTAGE
10 ~ 13.5V
1.0%
0.5%
0.5%
2.0%
0.5%
1000ms, 50ms, 16ms/230VAC
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
1000ms, 50ms, 14ms/115VAC at full load
1.0%
0.5%
0.5%
90 ~ 132VAC / 180 ~ 264VAC selected by switch
47~63Hz
78%
12A/115VAC
30A/115VAC
<2.0mA / 240VAC
83%
84%
254 ~ 370VDC
87%
87%
88%
7.5A/230VAC
50A/230VAC
105 ~ 125% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
5.75 ~ 6.3V
13.8 ~ 16.2V
18 ~ 21V
Protection type : Shut down o/p voltage, re-power on to recover
85
5 (TSW1) Detect on heatsink of power transistor
27.6 ~ 32.4V
31 ~ 36.5V
57.6 ~ 67.2V
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +85
, 10 ~ 95% RH
0.05%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950 Approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
VIBRATION
SAFETY STANDARDS
SAFETY &
WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
MTBF
OTHERS
NOTE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
197K hrs min. MIL-HDBK-217F (25
247*127*63.5mm (L*W*H)
2Kg; 6pcs/12Kg/0.76CUFT
)
DIMENSION
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.
Tolerance : includes set up tolerance, line regulation and load regulation.
TOTAL-POWER [ TOTAL POWER INTERNATIONAL ]
