Industrial Power Supplies
TCL Series
General Specifications
Safety standards
IEC 60950, EN 60950 (output SELV),
UL 60950, UL 508, EN 50178,
EN 60204, EN 61558-2-8.
- NEC class 2
(TCL 60 models only)
UL/cUL 60950 recognized, File E181381
UL 508C listed, File E210002
CB-Report per IEC 60950
EN 61000-6-3
EN 61000-6-2
degree of protection class 1
IP 20
(IEC 60529)
plastic FR2010-110C (UL 94V-0 rated)
35 mm DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring)
Adapter for Wall-/Chassi Mounting (included)
output characteristic optimized for battery
charging available on request
24–120 Watt
Safety approvals
(TCL 24 models pending)
Electromagnetic compatibility (EMC), Emissions
Electromagnetic compatibility (EMC), Immunity
Safety class
Case protection
Enclosure material
Mounting
Options
TCL–REM240 Redundancy Module
This module enables redundant operation of any two TCL models by decoupling
the 2 power supplies. It can also be used to separate sensitive loads from the main
power source.
Models
Order code
TCL–REM240
Inputs
Vin
2 x 5...60 VDC
Max power
per input
144 W
Output voltage
Vin – 0.9 VDC
Output current
max.
8A
Connection
detachable screw
terminal block
Specifications
Operating temperature
Electromagnetic compatibility
Dimensions
– 10°C...+70°C max. (14°F...+158°F)
derating above 40°C (104°F): 1.5%/K
in correspondence to connected units
(no internal switching device)
same as model TCL 24 (see page 4)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 5
TRACOPOWER [ TRACO ELECTRONIC AG ]
