DC/DC Converter
TEN 12 Series
12 Watt
Input Specifications
Input current
(no load)
Input current
(full load)
24 Vin models
48 Vin models
24 Vin;
24 Vin;
24 Vin;
48 Vin;
48 Vin;
48 Vin;
3.3 Vout models:
5 & ±5 Vout models:
other output models:
3.3 Vout models:
5 & ±5 Vout models:
other output models:
40 mA typ.
20 mA typ.
425 mA typ.
510 mA typ.
600 mA typ.
215 mA typ.
255 mA typ.
300 mA typ.
42 V max..
84 V max.
1.0 A max.
EN 55022 level A, FCC part 15, level A
±1%
± 0.5 % max.
± 0.5 % max.
50 mVpk-pk typ.
± 0.02 % / °C
>110% of Iout max. foldback
Hiccup mode, indefinite (automatic recovery)
470 µF max.
100 µF max.
– 40 °C ... + 60 °C
+ 95 °C max.
– 40 °C ... + 125 °C
above 60°C: 3% /°C
95 % rel H max.
> 700’000 h @ +25 °C
1‘500 VDC
200 pF typ
> 1‘000 M Ohm
400 kHz typ. (Pulse width modulation PWM)
ON:
OFF:
OFF idle current:
2.5 ... 5.5 VDC or open circuit.
0 ... 0.8 VDC or short circuit pin 2 and pin 6
10 mA max.
UL 1950, EN 60950, IEC 60950
Compliance up to 60 VDC input voltage (SELV limit)
cUL/UL File E188913
Surge voltage
(1 sec. max.)
Reverse voltage protection
Conducted noise
(input)
24 Vin models
48 Vin models
Output Specifications
Voltage set accuracy
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 90 %
Ripple and noise
(20 MHz Bandwidth)
Temperature coefficient
Output current limitation
Short circuit protection
Capacitive load
– single output models
– dual output models
– Operating
– Case temperature
– Storage
General Specifications
Temperature ranges
Derating
Humidity
(non condensing)
Reliability, calculated MTBF
(MIL-HDBK-217 E)
Isolation voltage
Isolation capacity
Input/Output
Input/Output
Isolation resistance
Input/Output (500 VDC)
Switching frequency
(fixed)
Remote ON/OFF (optional):
Safety standards:
Safety approvals:
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2
TRACOPOWER [ TRACO ELECTRONIC AG ]
