DC/DC Converters
TEN 5 Series
6 Watt
Input Specifications
Input current no load /full load
5 Vin models
12 Vin models
24 Vin models
48 Vin models
50 mA / 1460 mA typ.
20 mA / 590 mA typ.
5 mA / 290 mA typ.
3 mA / 145 mA typ.
Start-up voltage /
under voltage shut down
5 Vin models 4.4 VDC / 4.0 VDC
12 Vin models 8.0 VDC / 8.0 VDC
24 Vin models 16.0 VDC / 16.0 VDC
48 Vin models 32.0 VDC / 32.0 VDC
Surge voltage (1 sec. max.)
5 Vin models 10 V max.
12 Vin models 25 V max.
24 Vin models 50 V max.
48 Vin models 100 V max.
Reverse voltage protection
1.0 A max.
Conducted noise (input)
EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy
1 %
Regulation
– Input variation Vin min. to Vin max.
0.3 % max.
– Load variation 10 – 100 %
– single output models
– dual output models balanced load
– dual output models unbalanced load
1 % max.
1 % max.
3 % max.
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
50 mVpk-pk max.
± 0.02 % /K
Output current limitation
>120 % of Iout max., constant current
indefinite (automatic recovery)
Short-circuit protection
Capacitive load
– single output models
6800 µF max.
– dual output models
1000 µF max. (each output)
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
– 40 °C ... + 85 °C
+ 100 °C max.
– 55 °C ... + 125 °C
Derating
3.5% /K above 70°C
95 % rel H max.
>1 Mio. h @ + 25 °C
1’500 VDC
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217 E)
Isolation voltage
Isolation capacity
Isolation resistance
Switching frequency
Safety standards
Input/Output
Input/Output
380 pF typ.
Input/Output (500 VDC)
> 1‘000 M Ohm
300 kHz typ. (Pulse frequency modulation PFM)
UL 60950, IEC 60950, EN 60950
Compliance up to 60 VDC input voltage
(SELV limit)
Safety approval
UL /cUL File E188913 (5Vin models pending)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
TRACOPOWER [ TRACO ELECTRONIC AG ]
