DC/DC Converter
TEN 8 Series
8 Watt
Input Specifications
Input current
(no load)
12 Vin models:
24 Vin models:
48 Vin models:
12 Vin;
3.3 Vout models:
12 Vin; other output models:
24 Vin;
3.3 Vout models:
24 Vin; other output models:
48 Vin;
3.3 Vout models:
48 Vin; other output models:
12 Vin models:
24 Vin models:
48 Vin models:
20 mA typ.
15 mA typ.
10 mA typ.
700 mA typ.
820 mA typ.
350 mA typ.
400 mA typ.
170 mA typ.
200 mA typ.
36 V max.
50 V max.
100 V max.
EN 55022 level A, FCC part 15, level A
±2%
± 0.2 % max.
± 0.2 % max.
± 1.0 % max.
± 3.0 % max.
50 mVpk-pk max
± 0.02 % / °C
> 110% of Iout max., foldback
indefinite (automatic recovery)
3.3 Vout models:
5 Vout models / ± 5 Vout models:
12 Vout models / ±12 Vout models:
15 Vout models / ±15 Vout models:
– Operating
– Case temperature
– Storage
3300 µF max.
1600 µF max. /
±
1000 µF max.
350 µF max. /
±
160 µF max.
240 µF max./
±
100 µF max.
– 25 °C ... + 71 °C
(no derating)
+ 100 °C max.
– 55 °C ... + 105 °C
95 % rel H max.
>715’000 h @ + 25 °C
1’500 VDC
300 pF max.
> 1000 M Ohm
300 kHz typ. (Pulse width modulation PWM)
– ON:
– OFF:
– OFF idle current:
3.5 ... 12 VDC or open circuit.
0 ... 1.2 VDC or short circuit pin 1 and pin 2/3
2.5 mA
Input current
(full load)
Surge voltage
(100 msec. max.)
Conducted noise
(input)
Output Specifications
Voltage set accuracy
Regulation
– Input variation Vin min. to Vin max.
– Load variation 25 – 100 %
– single output models
– dual output models balanced load
– dual output models unbalanced load
Ripple and noise
(20 MHz Bandwidth)
Temperature coefficient
Current limitation
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
Humidity
(non condensing)
Reliability, calculated MTBF
(MIL-HDBK-217 E)
Isolation voltage
Isolation capacity
Isolation resistance
Switching frequency
Remote ON/OFF (optional):
– Input/Output
– Input/Output
– Input/Output (500 VDC)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2