欢迎访问ic37.com |
会员登录 免费注册
发布采购

TS1GCF133 参数 Datasheet PDF下载

TS1GCF133图片预览
型号: TS1GCF133
PDF下载: 下载PDF文件 查看货源
内容描述: 133X CF卡 [133X CompactFlash Card]
分类和应用:
文件页数/大小: 81 页 / 3415 K
品牌: TRANSCEND [ TRANSCEND INFORMATION. INC. ]
 浏览型号TS1GCF133的Datasheet PDF文件第2页浏览型号TS1GCF133的Datasheet PDF文件第3页浏览型号TS1GCF133的Datasheet PDF文件第4页浏览型号TS1GCF133的Datasheet PDF文件第5页浏览型号TS1GCF133的Datasheet PDF文件第7页浏览型号TS1GCF133的Datasheet PDF文件第8页浏览型号TS1GCF133的Datasheet PDF文件第9页浏览型号TS1GCF133的Datasheet PDF文件第10页  
TS1G~32GCF133
TS1G~32GCF133
Signal Description
Signal Name
A10 – A00
(PC Card Memory Mode)
133X CompactFlash Card
Dir.
I
Pin
Description
8,10,11,12, These address lines along with the -REG signal are used to select the following:
14,15,16,17, The I/O port address registers within the CompactFlash Storage Card , the
memory mapped port address registers within the CompactFlash Storage Card,
18,19,20
a byte in the card's information structure and its configuration control and status
registers.
This signal is the same as the PC Card Memory Mode signal.
A10 – A00
(PC Card I/O Mode)
A02 - A00
(True IDE Mode)
I
18,19,20
In True IDE Mode, only A[02:00] are used to select the one of eight registers
in the Task File, the remaining address lines should be grounded by the
host.
This signal is asserted high, as BVD1 is not supported.
BVD1
(PC Card Memory Mode)
-STSCHG
(PC Card I/O Mode)
Status Changed
-PDIAG
(True IDE Mode)
BVD2
(PC Card Memory Mode)
-SPKR
(PC Card I/O Mode)
-DASP
(True IDE Mode)
-CD1, -CD2
(PC Card Memory Mode)
I/O
46
This signal is asserted low to alert the host to changes in the READY and Write
Protect states, while the I/O interface is configured. Its use is controlled by the
Card Config and Status Register.
In the True IDE Mode, this input / output is the Pass Diagnostic signal in the
Master / Slave handshake protocol.
I/O
45
This signal is asserted high, as BVD2 is not supported.
This line is the Binary Audio output from the card. If the Card does not support
the Binary Audio function, this line should be held negated.
In the True IDE Mode, this input/output is the Disk Active/Slave Present signal in
the Master/Slave handshake protocol.
O
26,25
These Card Detect pins are connected to ground on the CompactFlash Storage
Card. They are used by the host to determine that the CompactFlash Storage
Card is fully inserted into its socket.
This signal is the same for all modes.
-CD1, -CD2
(PC Card I/O Mode)
-CD1, -CD2
(True IDE Mode)
This signal is the same for all modes.
Transcend Information Inc.
6