欢迎访问ic37.com |
会员登录 免费注册
发布采购

AGR19030EF 参数 Datasheet PDF下载

AGR19030EF图片预览
型号: AGR19030EF
PDF下载: 下载PDF文件 查看货源
内容描述: 30 W, 1930兆赫, 1990兆赫, PCS LDMOS RF功率晶体管 [30 W, 1930 MHz-1990 MHz, PCS LDMOS RF Power Transistor]
分类和应用: 晶体晶体管过程控制系统PCS放大器局域网
文件页数/大小: 10 页 / 329 K
品牌: TRIQUINT [ TRIQUINT SEMICONDUCTOR ]
 浏览型号AGR19030EF的Datasheet PDF文件第2页浏览型号AGR19030EF的Datasheet PDF文件第3页浏览型号AGR19030EF的Datasheet PDF文件第4页浏览型号AGR19030EF的Datasheet PDF文件第5页浏览型号AGR19030EF的Datasheet PDF文件第6页浏览型号AGR19030EF的Datasheet PDF文件第7页浏览型号AGR19030EF的Datasheet PDF文件第8页浏览型号AGR19030EF的Datasheet PDF文件第9页  
AGR19030EF
30 W, 1930 MHz—1990 MHz, PCS LDMOS RF Power Transistor
Introduction
The AGR19030EF is a 30 W, 28 V N-channel later-
ally diffused metal oxide semiconductor (LDMOS) RF
power field effect transistor (FET) suitable for per-
sonal communication service (PCS) (1930 MHz—
1990 MHz), global system for mobile communication
(GSM/EDGE), time division multiple access (TDMA),
and single-carrier or multicarrier class AB power
amplifier applications.
GSM Features
Typical performance over entire GSM band:
— P1dB: 30 W typical.
— Continuous wave (CW) power gain: @ P1dB =
15 dB.
— CW efficiency @ P1dB = 55% typical.
— Return loss: –12 dB.
Device Performance Features
High-reliability, gold-metalization process.
Low hot carrier injection (HCI) induced bias drift
over 20 years.
Figure 1. AGR19030EF (flanged) Package
Internally matched.
High gain, efficiency, and linearity.
Integrated ESD protection.
Device can withstand 10:1 voltage standing wave
ratio (VSWR) at 28 Vdc, 1930 MHz, 30 W CW
output power.
Large signal impedance parameters available.
N-CDMA Features
Typical 2 carrier N-CDMA performance: V
DD
=
28 V, I
DQ
= 350 mA, f1 = 1958.75 MHz, f2 =
1961.25 MHz, IS-95 CDMA (pilot, sync, paging,
traffic codes 8—13). Peak/average (P/A) = 9.72 dB
at 0.01% probability on CCDF. 1.2288 MHz trans-
mission bandwidth (BW). Adjacent channel power
ratio (ACPR) measured over 30 kHz BW at f1 –
885 kHz and f2 + 885 kHz. Third-order intermodu-
lation distortion (IM3) measured over a
1.2288 MHz BW at f1 – 2.5 MHz and f2 + 2.5 MHz.
— Output power (P
OUT
): 6 W.
— Power gain: 16 dB.
— Efficiency: 24.8%.
— IM3: –34.5 dBc.
— ACPR: –49 dBc.
ESD Rating*
AGR19030EF
HBM
MM
CDM
Minimum (V)
500
50
1500
Class
1B
A
4
EDGE Features
Typical EDGE performance, 1960 MHz, 26 V,
I
DQ
= 250 mA:
— Output power (P
OUT
): 12 W typical.
— Power gain: 15.5 dB.
— Efficiency: 38% typical.
— Modulation spectrum:
@ ±400 kHz = –61 dBc.
@ ±600 kHz = –74 dBc.
— Error vector magnitude (EVM) = 2.2%
* Although electrostatic discharge (ESD) protection circuitry has
been designed into this device, proper precautions must be
taken to avoid exposure to ESD and electrical overstress (EOS)
during all handling, assembly, and test operations.
PEAK Devices
Agere
employs a human-body model (HBM), a machine model (MM),
and a charged-device model (CDM) qualification requirement in
order to determine ESD-susceptibility limits and protection
design evaluation. ESD voltage thresholds are dependent on the
circuit parameters used in each of the models, as defined by
JEDEC's JESD22-A114B (HBM), JESD22-A115A (MM), and
JESD22-C101A (CDM) standards.
Caution: MOS devices are susceptible to damage from elec-
trostatic charge. Reasonable precautions in han-
dling and packaging MOS devices should be
observed.