AGR21060E
60 W, 2.110 GHz—2.170 GHz, N-Channel E-Mode, Lateral MOSFET
Introduction
The AGR21060E is a high-voltage, gold-metalized,
enhancement-mode, laterally diffused metal oxide
semiconductor (LDMOS) RF power transistor suit-
able for wideband code division multiple access
(W-CDMA), single and multicarrier class AB wireless
base station power amplifier applications.
)
Table 1. Thermal Characteristics
Parameter
Thermal Resistance,
Junction to Case:
AGR21060EU
AGR21060EF
Sym
R
ı
JC
R
ı
JC
Value
1.0
1.0
Unit
°C/W
°C/W
Table 2. Absolute Maximum Ratings*
Parameter
Drain-source Voltage
Gate-source Voltage
Total Dissipation at T
C
= 25 °C:
AGR21060EU
AGR21060EF
Derate Above 25
°C:
AGR21060EU
AGR21060EF
Operating Junction Tempera-
ture
Storage Temperature Range
Sym Value Unit
V
DSS
65
Vdc
V
GS
–0.5, 15 Vdc
P
D
P
D
—
—
T
J
175
175
1.0
1.0
200
W
W
W/°C
W/°C
°C
°C
AGR21060EU (unflanged)
AGR21060EF (flanged)
5B 03 STYLE 1
Figure 1. Available Packages
Features
Typical performance for two carrier 3GPP
W-CDMA systems. F1 = 2135 MHz and
F2 = 2145 MHz with 3.84 MHz channel bandwidth
(BW), adjacent channel BW = 3.84 MHz at F1 –
5 MHz and F2 + 5 MHz. Third-order distortion is
measured over 3.84 MHz BW at F1 – 10 MHz and
F2 + 10 MHz. Typical P/A ratio of 8.5 dB at 0.01%
(probability) CCDF:
— Output power: 13.5 W.
— Power gain: 14.5 dB.
— Efficiency: 26%.
— IM3: –34 dBc.
— ACPR: –37 dBc.
— Return loss: –12 dB.
High-reliability gold-metalization process.
Low hot carrier injection (HCI) induced bias drift
over 20 years.
Internally matched.
High gain, efficiency, and linearity.
Integrated ESD protection.
Device can withstand a 10:1 voltage standing wave
ratio (VSWR) at 28 Vdc, 2140 MHz, 60 W continu-
ous wave (CW) output power.
Large signal impedance parameters available.
T
STG
–65, 150
* Stresses in excess of the absolute maximum ratings can cause
permanent damage to the device. These are absolute stress rat-
ings only. Functional operation of the device is not implied at
these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute
maximum ratings for extended periods can adversely affect
device reliability.
Table 3. ESD Rating*
AGR21060E
HBM
MM
CDM
Minimum (V)
500
50
1500
Class
1B
A
4
* Although electrostatic discharge (ESD) protection circuitry has
been designed into this device, proper precautions must be
taken to avoid exposure to ESD and electrical overstress (EOS)
during all handling, assembly, and test operations.
PEAK Devices
Agere
employs a human-body model (HBM), a machine model (MM),
and a charged-device model (CDM) qualification requirement in
order to determine ESD-susceptibility limits and protection
design evaluation. ESD voltage thresholds are dependent on the
circuit parameters used in each of the models, as defined by
JEDEC's JESD22-A114B (HBM), JESD22-A115A (MM), and
JESD22-C101A (CDM) standards.
Caution: MOS devices are susceptible to damage from elec-
trostatic charge. Reasonable precautions in han-
dling and packaging MOS devices should be
observed.
TRIQUINT [ TRIQUINT SEMICONDUCTOR ]
