50-65 WATT DC TO DC CONVERTERS
DESCRIPTION
The PD65 series of DC/DC converters provide 50 to 65 watts
of continuous output power. Available in three standard input
range of 10-30 VDC, 20-60 VDC and 30-90 VDC, they are
ideal for a variety of applications including telecoms, process
control,
portable
equipment
and
vehicle
mounted
instrumentation. All units are available in compact “open PCB”
or “enclosed” mechanical formats.
PD65 SERIES
F E ATU R E S
‧
‧
‧
‧
‧
‧
Low cost
Small size, light weight
100
﹪
burn-in
Overvoltage protection
Overcurrent protection
Three wide input ranges:
10-30 VDC, 20-60 VDC and 30-90 VDC
I N P U T S P E C I F I C ATI O N S
Input voltage
:
10 to 30 VDC
(
PD65 “L” series
)
20 to 60 VDC
(
PD65 “M” series
)
30 to 90 VDC
(
PD65 “H” series
)
4.1A
(
rms
)
for 24 VDC
2.1A
(
rms
)
for 48 VDC
1.5A
(
rms
)
for 72 VDC
E N V I R O N M E N TA L S P E C I F I C ATI O N S
Operating temperature
:
St o r a g e t e m p e r a t u r e
:
Relative humidity
:
Derating
:
0
℃
to +70
℃
-40
℃
to +85
℃
5
﹪
to 95
﹪
non-condensing
Derate from 100
﹪
at +50
℃
linearly to 50
﹪
at +70
℃
Input current
:
OUTPUT SPECIFICATIONS
Output voltage/current:
Total output power:
Ripple and noise:
Overvoltage protection:
See rating chart
65 watts maximum
1﹪ peak to peak max.
set at 112 - 132﹪ of its nominal
output voltage
All outputs protected to short
circuit conditions
GENERAL SPECIFICATIONS
Switching frequency:
Efficiency:
Line regulation:
Withstand voltage:
MTBF:
32KHz ±5KHz
70﹪ minimum at full load
±0.5﹪ maximum at full load
1000VDC from input to output
400,000 hours minimum at full load
at 25℃ ambient, calculated per
MIL-HDBK-217F
Overcurrent protection:
Temperature coefficient:
All outputs ±0.04﹪ /℃
maximum
Maximum excursion of 4﹪ or
better on all models, recovering
to 1﹪ of final value within
500us after a 25﹪ step load
change
Transient response:
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616
●
sales@trumpower.com
●
www.TRUMPower.com