TRUMPower
DESCRIPTION
The TFC130 series incorporates creative high
efficiency circuitry, high power density (6.94
3
Watts/in ) and active Power Factor Correction
(PFC) to meet the requirements of data
networking, computing and telecommunication
systems.
PFC 130 WATT POWER SUPPLIES
TFC130 SERIES
(SINGLE OUTPUT)
(LVD)
RoHS
FEATURES
‧
‧
‧
‧
‧
‧
‧
EN61000-3-2 class A and D compliant
Power factor 0.98 typical
Very compact size, 3″×5″×1.2″
Overvoltage protections
Short circuit protections
Remote sense
Compliant with RoHS requirements
INPUT SPECIFICATIONS
90 to 264VAC
47 to 63Hz
2.1A（ rms） max. for 115VAC
1.1A（ rms） max. for 230VAC
Earth leakage current:
0.3mA max. @ 115VAC, 60Hz
(Touch current)
0.6mA max. @ 230VAC, 50Hz
Input voltage：
Input frequency：
Input current：
Safety Standard Approvals：
UL 60950-1
CSA C22.2 No. 60950-1
TÜV EN60950-1
OUTPUT SPECIFICATIONS
Output voltage/current：
See Rating Chart
Ripple and noise：
2% peak to peak on 5.1V model
1% peak to peak on other
models.
Overvoltage protection：
Provided on output set at
112–132% of its nominal output
voltage
Overcurrent protection：
Protected to short circuit
conditions
Temperature coefficient：
All outputs ± 0.04%/ºC maximum
Transient response：
Maximum excursion of 4% or
better on all models; recovering
to 1% of final value within 500µs
after a 25% step load change
GENERAL SPECIFICATIONS
Switching frequency：
110KHz ±15KHz
Power factor：
0.98 typical
Efficiency：
72% typical on 5.1V output,
76% typical on other outputs
Hold-up time：
15 msec minimum at 115VAC
Line regulation：
±0.5% maximum at full load
Inrush current：
35 amps @ 115VAC or 70 amps
@ 230VAC at 25ºC cold start
Withstand voltage：
3000VAC from input to output
1500VAC from input to ground
500VAC from output to ground
MTBF：
200,000 hours minimum
EMC Performance (EN55024)
EN55022:
FCC Part 15
VCCI:
EN61000-3-2:
EN61000-3-3:
EN61000-4-2:
EN61000-4-3:
EN61000-4-4:
EN61000-4-5:
EN61000-4-6:
EN61000-4-8:
EN61000-4-11:
Class B conducted, class A radiated
Class B conducted, class A radiated
Class B conducted, class A radiated
Harmonic distortion, class A and D
Line flicker
ESD, ±8KV air and ±4KV contact
Radiated immunity, 3V/m
Fast transient/burst, ±1KV
Surge, ±1KV diff, ±2KV com.
Conducted immunity, 3Vrms
Magnetic field immunity, 1A/m
Voltage dips, 30% reduction for 500ms
and >95% reduction for 10ms
ENVIRONMENTAL SPECIFICATIONS
Operating temperature：
Storage temperature：
Relative humidity：
Derating：
Cooling：
-10ºC to +60ºC
-40ºC to +85ºC
5% to 95% non-condensing
Derate from 100% at +40ºC
linearly to 50% at +60ºC
10 CFM total forced air from two
40mm diameter fans or the like
is required and provided by user
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616
●
Fax: 408-988-6622
●
email: sales@trumpower.com
●
Website: www.TRUMPower.com
TRUMPOWER [ Tumbler Technologies + TRUMPower ]
