SCA1000-N1000070
Accelerometer
FEATURES
• Silicon 3D-MEMS sensor
• Dual axis X-Y measurement
•
±4
g range
• Over damped sensing element to control frequency response
• Advanced failure detection
• Lead-free reflow solderable lead free component
BENEFITS
• Excellent long term stability
• Highly damped sensing element
• Outstanding shock durability
APPLICATIONS
• Inclination measurement in high vibration environ-
ment
• Artificial horizon
For customized product, please contact VTI Technologies
ENVIRONMENTAL CHARACTERISTICS
Parameter
Operating Temperature Range
Storage Temperature Range
Shock Survival
Condition
Min
-40
-55
Typ.
Max
125
125
20 000
Units
°C
°C
g
ELECTRICAL CHARACTERISTICS
Parameter
Supply voltage
(1
Current consumption
Analog Output load
SPI clock frequency
AD conversion time
Data transfer time
@500 kHz clock
150
38
Resistive Vout to Vdd or GND
Capacitive
10
20
500
Condition
Min
4.75
Typ.
5
4.5
Max
5.25
Units
V
mA
kΩ
nF
kHz
µs
µs
PERFORMANCE CHARACTERISTICS
Parameter
Measuring range
Measuring direction
Zero point
(2
Zero point error over temperature
Sensitivity
(3
Sensitivity error over temperature
Typical Non-linearity
(7
Cross-axis sensitivity
(4
Frequency response –3dB point
(5
Ratiometric error
(6
Output noise density, typical
Digital output resolution
See “Measuring Directions”
Mounting position
-40…+125 °C
@ room temperature
-40…+125 °C
Range = -3 g...+3 g
Range = -4 g...+4 g
@ room temperature
KP, 20 dB/decade
Vdd = 4.75...5.25 V
From DC...80 Hz
FS
Condition
SCA1000-N1000070
±4
X-Y
Vdd/2
±60
0.55
±2.5
±80
±160
3.5
115±55
2
50
11
Units
g
V
mg
V/g
%
mg
mg
%
Hz
%
µg/
Hz
Bits
VDD = 5.00V, UNLESS OTHERWISE SPECIFIED
Note 1
Note 2
Note 3
Note 4
Note 5
Note 6.
100 nF supply by-pass capacitor is needed.
Zero point specified as Voffset = Vout(0 g)
Sensitivity specified as Vsens = {Vout(+1 g) - Vout(-1 g)}/2
The cross-axis sensitivity determines how much acceleration inclination, perpendicular to the measuring axis,
couples to the output.
The frequency response is determined by the sensing element’s internal gas damping. The output has true DC
(0Hz) response.
The ratiometric error is specified as
Vout(@Vx) x
5.00
V
RE =
100%
x
1-
Vx
Vout(@
5
V)
Rev. 2 / 16 Aug 2006
VTI Technologies reserves the right to modify this specification without prior to notice.