JR Series
Single and Dual Outputs
10 Watt DC/DC Converter
2:1 Wide Input Voltage Range
FEATURES
●
10 Watts Output Power
●
High Efficiency up to 86%
●
Fixed Switching Frequency
●
Six-Sided Continuous Shield
●
2:1 Wide Input Voltage Range
●
Standard 2 x 1 x 0.4 inch Package
●
International Safety Standard Approval
●
Options: Add suffix “-I” for Extended Operating Temperature Range
UL
TUV
CB
CE MARK
SPECIFICATIONS:
JR Series
All specifications apply @ 25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range ............ 5V nominal input ......................... 4.5 - 9VDC
12V nominal input ........................ 9 - 18VDC
24V nominal input ...................... 18 - 36VDC
48V nominal input ...................... 36 - 75VDC
Input Filter ....................................................................................... Pi Type
Input Surge Voltage (100ms max) ....... 5V input .............................15VDC
12V input ...........................36VDC
24V input ...........................50VDC
48V input .........................100VDC
Input Reflected Ripple Current (See Note 2) ...............................30mAp-p
(nominal Vin and full load)
Start Up Time (nominal Vin and constant resistive load) .............20ms typ.
Remote ON/OFF (Option) (See Note 3)
(Positive Logic)............... DC-DC ON .............Open or 3.5V < Vr < 12V
DC-DC OFF .............Short or 0V < Vr < 1.2V
(Negative Logic) ............. DC-DC ON ...............Short or 0V < Vr < 1.2V
DC-DC OFF ...........Open or 3.5V < Vr < 12V
Remote Off Input Current (nominal Vin) ............................................20mA
Efficiency ........................................................................................see table
Switching Frequency .................................................................300KHz typ.
Isolation Voltage (Input to Output)......................................... 1600VDC min.
Isolation Resistance ...............................................................10 ohms min.
Isolation Capacitance ................................................................ 300pF max.
9
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (See derating curves)
Standard ............................................... -25°C ~ +85°C (with derating)
“I” (See Note 5) ........................................ -40°C ~ +85°C (no derating)
(except for 5V input models)
Storage Temperature .......................................................... -55°C ~ +105°C
Maximum Case Temperature ............................................................. 100°C
Relative Humidity...................................................................5% to 95% RH
Thermal Impedance (See Note 6)
Natural Convection ............................................................. 12°C / Watt
Natural Convection with Heat-Sink..................................... 10°C / Watt
Thermal Shock .................................................................... MIL-STD-810D
Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z
MTBF (See Note 4) .......................................................... 1.976 x 10 hours
6
OUTPUT SPECIFICATIONS
Output Voltage ..............................................................................see table
Voltage Accuracy (nominal Vin and full load) ...................................... ±1%
Output Current ..............................................................................see table
Output Power ........................................................................ 10 watts max.
Line Regulation (LL to HL at FL)....................................................... ±0.2%
Load Regulation (10% - 100 % FL).............. Single Output.............. ±0.5%
Dual Output ................... ±1%
Cross Regulation (Dual) (Asymmetrical load 25% / 100% FL) ............ ±5%
Minimum Load (See Note 1) ..............................................10% of full load
Ripple/Noise (20 MHz BW) ...................... Single Output..............50mVp-p
Dual Output ................75mVp-p
Temperature Coefficient ................................................. ±0.02% / °C max.
Transient Response Recovery Time (25% load step) .......................250us
PHYSICAL SPECIFICATIONS
Weight ..................................................................................... 27g (0.95 oz)
Dimensions....................... 2.0 x 1.0 x 0.40 inches (50.8 x 25.4 x 10.2 mm)
Case Material ..............................................................Nickel-coated copper
Base Material...................................................Non-conductive black plastic
Potting material..................................................................Epoxy (UL94-V0)
Shielding......................................................................................... six-sided
SAFETY & EMC
Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1
(except for 5V input models)
Conducted Emissions.........EN55022 .............................................. Class A
Radiated Emissions............EN55022 .............................................. Class A
EN55022 (See Note 7)......................... Class B
ESD ....................................EN61000-4-2.............................Perf. Criteria B
Radiated Immunity..............EN61000-4-3.............................Perf. Criteria A
Fast Transient.....................EN61000-4-4.............................Perf. Criteria B
Surge ..................................EN61000-4-5.............................Perf. Criteria B
PROTECTION SPECIFICATIONS
Over Voltage Protection................. 3.3V output ..................................3.9V
(zener diode clamp)
5V output ..................................6.2V
12V output ...................................15V
15V output ...................................18V
Over Load Protection (% of full load at nominal input).............. 150% max.
Short Circuit Protection. ...................................Hiccup, automatic recovery
Conducted Immunity...........EN61000-4-6.............................Perf. Criteria A
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
WALL [ WALL INDUSTRIES,INC. ]
