PSPW120 Series
120 Watts with PFC
5” x 3” x 1.18” Single Output
AC/DC Open Frame Power Supply
FEATURES
●
PFC > 0.9
●
Single Output
●
Universal AC Input
●
Output Voltages from 12 to 24VDC
●
5(L) x 3(W) x 1.18(H) inches (127 x 76.2 x 30 mm)
●
Over Voltage/ Over Load/ Short Circuit Protected
5(L) x 3(W) x 1.18(H) inches
SPECIFICATIONS:
PSPW120 Series
All specifications apply @ ±25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
Input Range………………………………………………. 90-264VAC
Input Frequency……………………………………………... 47-63Hz
Input Current………………………... 2.5A max. (RMS) @ 115VAC
Inrush Current………… < 30A peak at 115VAC cold start @ 25°C
…………………………. < 50A peak at 230VAC cold start @ 25°C
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature……….. 0°C to +40°C ambient derate each
output at 2.5% per degree from
+40°C to 60°C
Humidity (non-condensing)……………………………… 5% to 95%
Temperature Coefficient………………………………… ±0.04% / °C
Cooling…………………………………………….. free air convection
MTBF……… 80,000 hrs at full load and 25°C ambient temperature
OUTPUT SPECIFICATIONS
Output Current……………………………………………… see table
Output Power…………………. 120W max with convection cooling
Output Regulation………………………………………….. see table
Ripple/Noise (20 MHz BW)………………………………………. 1%
Hold-up Time….… 16ms at 120 watt load & 115VAC nominal line
PHYSICAL SPECIFICATIONS
Weight…………………………………………………………….. 10 oz
Dimensions……………… 5 x 3 x 1.18 inches (127 x 76.2 x 30 mm)
SAFETY & EMC
Safety Standards………………………………………… UL 60950-1
………………………………………………..CSA C22.2 No. 60950-1
…………………………………………………………TUV EN60950-1
………………………………….……………………...CB IEC 60950-1
EMC Standards…………………………………FCC Part 15 Class B
……………………………………………………… CISPR 22 Class B
……………………………………………………… EN 55022 Class B
………………………………………………………………... EN 55024
…………………………………………………. EN 61000-3-2 Class D
…………………………………………………………………………CE
PROTECTION
Short Circuit Protection………………………………... Auto recover
Over Voltage Protection……. Output 110%-130% above following
nominal output.
…………………………………………… Latching type, AC Recycle
Over Load Protection……….. Over load protected @ 105%-150%
above following maximum rating.
GENERAL SPECIFICATIONS
Efficiency……………………………………. 85% typical at full load
Power Factor……………………………………………………...>0.9
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797