欢迎访问ic37.com |
会员登录 免费注册
发布采购

PSRL0601X-09 参数 Datasheet PDF下载

PSRL0601X-09图片预览
型号: PSRL0601X-09
PDF下载: 下载PDF文件 查看货源
内容描述: 单路输出高达320瓦AC / DC开关电源 [Single Output Up to 320 Watts AC/DC Switching Power Supply]
分类和应用: 开关
文件页数/大小: 5 页 / 367 K
品牌: WALL [ WALL INDUSTRIES,INC. ]
 浏览型号PSRL0601X-09的Datasheet PDF文件第2页浏览型号PSRL0601X-09的Datasheet PDF文件第3页浏览型号PSRL0601X-09的Datasheet PDF文件第4页浏览型号PSRL0601X-09的Datasheet PDF文件第5页  
PSRL0601 Series
Single Output
Up to 320 Watts
AC/DC Switching Power Supply
FEATURES
Smallest 320W with 1U Height Power Density: 8.9 Watts/cu in
Low Leakage Current 500uA @ 240VAC / 300uA @ 120VAC
Power Factor Corrected to EN61000-3-2 Class A
Peak Power 700W within 500uS Duty Duration
Approved to UL CUL TUV CB and CE
AC Input Range Auto-Selectable
Output Voltages from 2 ~ 60VDC
4 - Mechanical Options
2 Year Warranty
SPECIFICATIONS:
PSRL0601 Series
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 - 132 / 180 - 264VAC Auto-ranging
Input Frequency
47 to 63Hz
Input Current
8 / 4A at 100 - 120 / 200 - 240VAC
Inrush Current
Max 70A @ 230VAC and 35A @ 115VAC; cold start.
Leakage Current
Regular type 1.5mA @240VAC.
(Optional for 500µA max. at 240VAC / 300µA max. at 120VAC input).
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power Range
320 Watts max with 22CFM airflow.
(See Notes 2, 3, 4, and 5)
Output Adjustability
Output user adjustable ±5% minimum.
Total Regulation
±1%
Output Current
See Table
Ripple & Noise (peak to peak)
See Table
Transient Response
Returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%.
Hold-Up Time
20ms min. at 80% of full load.
Overshoot
Turn-on & off overshoot < 5% over nominal voltage.
Turn On Delay
1 second maximum at 120VAC.
PROTECTION
Over Voltage Protection
Unit latching down when output exceeds 130% and recycle AC input to reset.
Short Circuit Protection
Trip without damage and auto-recovery.
Over-Temperature Protection
Unit protected of excessive operating ambient 85°C; automatic recovery.
Over Power Protection
C.C. mode 110-140%; auto-recovery.
Input Fusing Protection
One T8AL250V fuse inserted in primary.
GENERAL SPECIFICATIONS
Switching Frequency
23KHz fixed frequency.
Efficiency
70% for 3.3V, 75% for 5V, 80% for 12V, and 83% min. for other outputs (Measuring at 230VAC and full load).
1500 VAC input line to chassis (10mA DC cut off current). 3000VAC primary to secondary windings; 1500VAC
Withstand Voltage
primary to core. All for 3 sec.
Burn In
45 ±5°C for one hour @ 230VAC with full load.
PFC
Power factor correction pass EN61000-3-2 Class A.
Designated as
PG
on CN1 and TTL high 100-500ms after regulation. It goes low at least 1ms before loss of
Power Good
regulation and has ability to sink 100mA.
Power Supply On
Green LED designated as
LED1
on the PCB.
Grounding Test
Apply 25A from ground pin of the three prong plug to the far most earth. Max. allowable resistance is 0.1 ohm.
Designated as
FF
on pin 3 of CN1 is an open collector output rated for 15VDC/5mA sink current maximum; it
Fan Fail (FF) Alarm
will go high when a fan failure is detected.
o
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797