PSRL5017R8-N
I
Series
Up to 800 Watts
Single Output with Active PFC
Forced Current Sharing Series
AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
GENERAL SPECIFICATIONS (CONTINUED)
Designated as
CSH
on the CN3, optional single wired for forced current sharing function and parallel up to 4
Current Sharing
units within 10% accuracy at full load.
Current Monitor
Designated as
CMN
on the CN3 is a 0.5V to 3VDC output voltage to represent 0% to 100% output current.
Bi-color
LED1
emit Green for Power On and emit Orange when protection is enabled or RSW is applied a low
LED Display
signal.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
Storage Temperature
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z axis.
U Type
(U-Chassis): 25CFM to achieve maximum power
Cooling
E & F Type
(Enclosed with built-in fan): Self cooled by built-in fan.
MTBF
150,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
U Type
(U-Chassis): 1350 grams
Weight
E & F Type
(Enclosed with built-in fan): 1450 grams
U Type
(U-Chassis): 8(L) x 4.33(W) x 2.5(H) inches.
Dimensions
E Type
(Enclosed with built-in fan): 9.17(L) x 4.25(W) x 2.5(H) inches.
F Type
(Enclosed with top built-in fan): 8(L) x 4.33(W) X 3.4(H) inches.
Warranty
2 years
SAFETY
Emissions
FCC part15, CISPR 22 Class B, Conducted.
Approved to UL60950-1, CSA C22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3, and
Safety Regulations
IEC61000-4 Series Regulations and CB.
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
PSRL5017Rx8-12N
I
PSRL5017Rx8-15N
I
PSRL5017Rx8-24N
I
PSRL5017Rx8-36N
I
PSRL5017Rx8-40N
I
PSRL5017Rx8-48N
I
Output Voltage
Range
12 – 14 VDC
15 – 19 VDC
20 – 26 VDC
27 – 36 VDC
37 – 47 VDC
48 – 60 VDC
Preset
Voltage
12 VDC
15 VDC
24 VDC
36 VDC
40 VDC
48 VDC
Output
Current
62.5A
50A
40A
29.63A
21.62A
16.67A
Regulation Ripple & Noise
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
Output Power
750W
750W
800W
800W
800W
800W
NOTES
1. PSRL5017R8-N
I
Series is designated as PSRL5017Rxy-z where
x
can be
E
(enclosed with end side built-in fan),
U
(U-Chassis with
optional cover), or
F
(enclosed with top built-in fan),
y
=
8
for output power from 750W to 800W, and
z
can be
12N
I
, 15N
I
, 24N
I
, 36N
I
,
40N
I
, or 48N
I
for output voltage
(
I
denote forced current sharing option (output with internal OR-ring diode).
2. All output ranges are covered in agency certifications and preset voltage will be set as standard models. If any request is not preset
output, then please contact us in advance.
3. U-Chassis type needs external forced airflow min. 25CFM to achieve maximum power.
4. Ripple & noise are measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1uF ceramic and 22uF electrolytic capacitors.
5. Providing peak power to 900W within 500uS for all models, longer duty duration need contact manufacturer.
6. 1% minimum load is required to maintain the ripple and regulation.
7. Cover is optional for U-Chassis Type. Please call factory for ordering details.
8. Output is fully isolated.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
WALL [ WALL INDUSTRIES,INC. ]
