欢迎访问ic37.com |
会员登录 免费注册
发布采购

W3E32M72S-266BI 参数 Datasheet PDF下载

W3E32M72S-266BI图片预览
型号: W3E32M72S-266BI
PDF下载: 下载PDF文件 查看货源
内容描述: 32Mx72 DDR SDRAM [32Mx72 DDR SDRAM]
分类和应用: 存储内存集成电路动态存储器双倍数据速率时钟
文件页数/大小: 19 页 / 669 K
品牌: WEDC [ WHITE ELECTRONIC DESIGNS CORPORATION ]
 浏览型号W3E32M72S-266BI的Datasheet PDF文件第2页浏览型号W3E32M72S-266BI的Datasheet PDF文件第3页浏览型号W3E32M72S-266BI的Datasheet PDF文件第4页浏览型号W3E32M72S-266BI的Datasheet PDF文件第5页浏览型号W3E32M72S-266BI的Datasheet PDF文件第6页浏览型号W3E32M72S-266BI的Datasheet PDF文件第7页浏览型号W3E32M72S-266BI的Datasheet PDF文件第8页浏览型号W3E32M72S-266BI的Datasheet PDF文件第9页  
White Electronic Designs
32Mx72 DDR SDRAM
FEATURES
Data rate = 200, 250, 266, 333Mbs
Package:
• 219 Plastic Ball Grid Array (PBGA), 32 x 25mm
2.5V ±0.2V core power supply
2.5V I/O (SSTL_2 compatible)
Differential clock inputs (CK and CK#)
Commands entered on each positive CK edge
Internal pipelined double-data-rate (DDR)
architecture; two data accesses per clock cycle
Programmable Burst length: 2,4 or 8
Bidirectional data strobe (DQS) transmitted/
received with data, i.e., source-synchronous data
capture (one per byte)
DQS edge-aligned with data for READs; center-
aligned with data for WRITEs
DLL to align DQ and DQS transitions with CK
Four internal banks for concurrent operation
Data mask (DM) pins for masking write data
(one per byte)
Programmable IOL/IOH option
Auto precharge option
Auto Refresh and Self Refresh Modes
Commercial, Industrial and Military
TemperatureRanges
Organized as 32M x 72
Weight: W3E32M72S-XBX – 3.0 grams typical
W3E32M72S-XBX
BENEFITS
40% SPACE SAVINGS vs. TSOP
Reduced part count
34% I/O reduction vs TSOP
Reduced trace lengths for lower parasitic
capacitance
Suitable for hi-reliability applications
Laminate interposer for optimum TCE match
GENERAL DESCRIPTION
The 256MByte (2Gb) DDR SDRAM is a high-speed CMOS,
dynamic random-access, memory using 5 chips containing
536,870,912 bits. Each chip is internally configured as a
quad-bank DRAM.
The 256MB DDR SDRAM uses a double data rate
ar chi tec ture to achieve high-speed operation. The
double data rate architecture is essentially a 2n-prefetch
architecture with an interface designed to transfer two data
words per clock cycle at the I/O pins. A single read or write
access for the 256MB DDR SDRAM effectively consists
of a single 2n-bit wide, one-clock-cycle data tansfer at the
internal DRAM core and two corresponding n-bit wide,
one-half-clock-cycle data transfers at the I/O pins.
A bi-directional data strobe (DQS) is transmitted
externally, along with data, for use in data capture at the
receiver.strobe transmitted by the DDR SDRAM during
READs and by the memory contoller during WRITEs. DQS
is edge-aligned with data for READs and center-aligned
with data for WRITEs. Each chip has two data strobes, one
for the lower byte and one for the upper byte.
The 256MB DDR SDRAM operates from a differential clock
(CK and CK#); the crossing of CK going HIGH and CK#
going LOW will be referred to as the positive edge of CK.
Commands (address and control signals) are registered
at every positive edge of CK. Input data is registered on
both edges of DQS, and output data is referenced to both
edges of DQS, as well as to both edges of CK.
* This product is subject to change without notice.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
March 2006
Rev. 2
1
White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com