W29F102
64K
×
16 CMOS FLASH MEMORY
GENERAL DESCRIPTION
The W29F102 is a 1-megabit, 5-volt only CMOS flash memory organized as 64K
×
16 bits. The
device can be programmed and erased in-system with a standard 5V power supply. A 12-volt V
PP
is
not required. The unique cell architecture of the W29F102 results in fast program/erase operations
with extremely low current consumption (compared to other comparable 5-volt flash memory
products). The device can also be programmed and erased using standard EPROM programmers.
FEATURES
•
Single 5-volt operations:
−
5-volt Read
−
5-volt Erase
−
5-volt Program
•
Low power consumption
−
Active current: 25 mA (typ.)
−
Standby current: 20
µA
(typ.)
•
•
•
Fast Program operation:
−
Word-by-Word programming: 50
µS
(max.)
Fast Erase operation: 100 mS (typ.)
Fast Read access time: 45/50/55/70 nS
Endurance: 1K/10K cycles (typ.)
Ten-year data retention
Hardware data protection
8K word Boot Block with Lockout protection
•
•
•
•
Automatic program and erase timing with
internal V
PP
generation
End of program or erase detection
−
Toggle bit
−
Data polling
Latched address and data
TTL compatible I/O
JEDEC standard word-wide pinouts
Available packages: 40-pin TSOP and 44-pin
PLCC
•
•
•
•
•
•
-1-
Publication Release Date: June 1999
Revision A4