欢迎访问ic37.com |
会员登录 免费注册
发布采购

WM8952 参数 Datasheet PDF下载

WM8952图片预览
型号: WM8952
PDF下载: 下载PDF文件 查看货源
内容描述: 单声道ADC,带有麦克风前置放大器 [Mono ADC with Microphone Pre-amplifier]
分类和应用: 放大器
文件页数/大小: 72 页 / 893 K
品牌: WOLFSON [ WOLFSON MICROELECTRONICS PLC ]
 浏览型号WM8952的Datasheet PDF文件第2页浏览型号WM8952的Datasheet PDF文件第3页浏览型号WM8952的Datasheet PDF文件第4页浏览型号WM8952的Datasheet PDF文件第5页浏览型号WM8952的Datasheet PDF文件第6页浏览型号WM8952的Datasheet PDF文件第7页浏览型号WM8952的Datasheet PDF文件第8页浏览型号WM8952的Datasheet PDF文件第9页  
w
DESCRIPTION
The WM8952 is a low power, high quality mono ADC designed
for portable applications such as wireless microphones or
headsets.
The device integrates support for differential or single ended
microphone connections. External component requirements
are reduced as no separate microphone amplifier is required.
An advanced Sigma Delta Converter design is used to give
high quality audio at sample rates from 8 to 48ks/s. A
selectable high pass filter and four fully-programmable notch
filters are also available in the signal path. An advanced mixed
signal ALC function with noise gate is provided, supporting
readback of PGA gain during ALC operation. The digital audio
interface supports A-law and
μ-law
companding.
An on-chip PLL is provided to generate the required Master
Clock from an external reference clock. The PLL clock can
also be output if required elsewhere in the system.
The WM8952 operates at supply voltages from 2.5 to 3.6V,
although the digital supplies can operate at voltages down to
1.71V to save power. Different sections of the chip can also be
powered down under software control using the selectable two
or three wire control interface. The device is supplied in a very
small W-CSP package, offering high levels of functionality in
minimum board area, with high thermal performance.
WM8952
Mono ADC with Microphone Pre-amplifier
FEATURES
Mono ADC:
Audio sample rates:8, 11.025, 16, 22.05, 24, 32, 44.1, 48kHz
ADC SNR 94dB, THD -80dB (‘A’-weighted @ 8 – 48ks/s)
Mic Preamps :
Differential or single end Microphone Interface
- Programmable preamp gain
- Pseudo differential inputs with common mode rejection
- Programmable ALC / Noise Gate in ADC path
Low-noise bias supplied for electret microphones
Multiple analog or ‘Aux’ inputs with analogue mixing
OTHER FEATURES
Programmable high pass filter (wind noise reduction)
4 notch filters (narrowband noise suppression)
On-chip PLL
Low power, low voltage
- 2.5V to 3.6V (digital: 1.71V to 3.6V)
28 ball W-CSP (2.59 × 2.5 × 0.7mm, 0.4mm pitch) Package
APPLICATIONS
Headsets
Wireless microphones
General purpose mono audio ADC
BLOCK DIAGRAM
WOLFSON MICROELECTRONICS plc
To receive regular email updates, sign up
at
http://www.wolfsonmicro.com/enews
Pre Production, Rev 3.1, June 2011
Copyright
©2011
Wolfson Microelectronics plc