A
PPLICATION
N
OTE
A V A I L A B L E
AN61 • AN75
X25F128
• AN77 • AN79 • AN82
X25F128
FEATURES
• 1MHz Clock Rate
• SPI Serial Interface
• 16K X 8 Bits
— 32 Byte Small Sector Program Mode
• Low Power CMOS
— <1
µ
A Standby Current
— <5mA Active Current
• 1.8V – 3.6V or 5V “Univolt” Read and
Program Power Supply Versions
• Block Lock Protection
— Protect 1/4, 1/2 or all of E
2
PROM Array
• Built-in Inadvertent Program Protection
— Power-Up/Power-Down protection circuitry
— Program Enable Latch
— Program Protect Pin
• Self-Timed Program Cycle
— 5ms Program Cycle Time (Maximum)
• High Reliability
— Endurance: 100,000 cycles per byte
— Data Retention: 100 Years
— ESD protection: 2000V on all pins
• 8-Lead PDlP Package
• 16-Lead 150 mil SOIC Package
FUNCTIONAL DIAGRAM
DATA REGISTER
SI
SECTOR DECODE LOGIC
SO
COMMAND
DECODE
AND CONTROL
LOGIC
32
X
DECODE
LOGIC
8
16K x 8 Bits
SerialFlash™ Memory With Block Lock™ Protection
DESCRIPTION
The X25F128 is a 131,072-bit CMOS SerialFlash
memory, internally organized 16K X 8. It features a
“Univolt” Program and Read voltage, Serial Peripheral
Interface (SPI), and software protocol allowing operation
on a simple three-wire bus. The bus signals are a clock
input (SCK), plus separate data in (SI) and data out (SO)
lines. Access to the device is controlled through a chip
select (CS) input, allowing any number of devices to
share the same bus.
The X25F128 also features two additional inputs that
provide the end user with added flexibility. By asserting
the
HOLD
input, the X25F128 will ignore transitions on
its inputs, thus allowing the host to service higher priority
interrupts. The
PP
input can be used as a hardwire input
to the X25F128 disabling all program attempts to the
status register, thus providing a mechanism for limiting
end user capability of altering 0, 1/4, 1/2, or all of the
memory.
The X25F128 utilizes Xicor’s proprietary flash cell, pro-
viding a minimum endurance of 100,000 cycles and a
minimum data retention of 100 years.
SCK
MEMORY
ARRAY
CS
HOLD
STATUS
REGISTER
PP
PROGRAMMING
CONTROL LOGIC
HIGH VOLTAGE
CONTROL
6829 ILL F01.1
SerialFlash™ and Block Lock™ Protection are trademarks of Xicor, Inc.
© Xicor, Inc. 1995, 1996 Patents Pending
6829-1.9 4/7/97 T3/C0/D0 SH
1
Characteristics subject to change without notice