0
R
XC9572XL High Performance
CPLD
0
0
DS057 (v2.0) April 3, 2007
Product Specification
cations and computing systems. It is comprised of four
54V18 Function Blocks, providing 1,600 usable gates with
propagation delays of 5 ns. See
for overview.
Features
•
•
•
•
5 ns pin-to-pin logic delays
System frequency up to 178 MHz
72 macrocells with 1,600 usable gates
Available in small footprint packages
- 44-pin PLCC (34 user I/O pins)
- 44-pin VQFP (34 user I/O pins)
- 48-pin CSP (38 user I/O pins)
- 64-pin VQFP (52 user I/O pins)
- 100-pin TQFP (72 user I/O pins)
- Pb-free available for all packages
Optimized for high-performance 3.3V systems
- Low power operation
- 5V tolerant I/O pins accept 5V, 3.3V, and 2.5V
signals
- 3.3V or 2.5V output capability
- Advanced 0.35 micron feature size CMOS
Fast FLASH™ technology
Advanced system features
- In-system programmable
- Superior pin-locking and routability with
Fast CONNECT™ II switch matrix
- Extra wide 54-input Function Blocks
- Up to 90 product-terms per macrocell with
individual product-term allocation
- Local clock inversion with three global and one
product-term clocks
- Individual output enable per output pin
- Input hysteresis on all user and boundary-scan pin
inputs
- Bus-hold circuitry on all user pin inputs
- Full IEEE Standard 1149.1 boundary-scan (JTAG)
Fast concurrent programming
Slew rate control on individual outputs
Enhanced data security features
Excellent quality and reliability
- Endurance exceeding 10,000 program/erase
cycles
- 20 year data retention
- ESD protection exceeding 2,000V
Pin-compatible with 5V-core XC9572 device in the
44-pin PLCC package and the 100-pin TQFP package
Power Estimation
Power dissipation in CPLDs can vary substantially depend-
ing on the system frequency, design application and output
loading. To help reduce power dissipation, each macrocell
in a XC9500XL device may be configured for low-power
mode (from the default high-performance mode). In addi-
tion, unused product-terms and macrocells are automati-
cally deactivated by the software to further conserve power.
For a general estimate of I
CC
, the following equation may be
used:
I
CC
(mA) = MC
HS
(0.175*PT
HS
+ 0.345) + MC
LP
(0.052*PT
LP
+ 0.272) + 0.04 * MC
TOG
(MC
HS
+MC
LP
)* f
where:
MC
HS
= # macrocells in high-speed configuration
PT
HS
= average number of high-speed product terms
per macrocell
MC
LP
= # macrocells in low power configuration
PT
LP
= average number of low power product terms per
macrocell
f = maximum clock frequency
MCTOG = average % of flip-flops toggling per clock
(~12%)
This calculation was derived from laboratory measurements
of an XC9500XL part filled with 16-bit counters and allowing
a single output (the LSB) to be enabled. The actual I
CC
value varies with the design application and should be veri-
fied during normal system operation.
shows the
above estimation in a graphical form. For a more detailed
discussion of power consumption in this device, see Xilinx
•
•
•
•
•
•
•
WARNING: Programming temperature range of
T
A
= 0° C to +70° C
Description
The XC9572XL is a 3.3V CPLD targeted for high-perfor-
mance, low-voltage applications in leading-edge communi-
© 2006 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at
All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.
DS057 (v2.0) April 3, 2007
Product Specification
1
XILINX [ XILINX, INC ]
