Product specification
9
18
General Purpose & High Cap.
X5R
4 V to 50 V
Surface Mount Multilayer Ceramic Capacitors
ELECTRICAL CHARACTERISTICS
X5R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all tests and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
-
Temperature: 15 °C to 35 °C
Relative humidity: 25% to 75%
Air pressure: 86 kPa to 106 kPa
-
-
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 6
VALUE
DESCRIPTION
Capacitance range
10 nF to 100 µF
±10% and ±20%
Capacitance tolerance
Dissipation factor (D.F.)
6.3 V
10 V
≤ 5%
≤ 7%
0402 180 nF
Exception:
≥
;
1210 ≥ 22 µF
0402 ≥ 330 nF;
1206 ≥ 22 µF;
0201 ≥ 12 nF;
0805 ≥ 1 µF;
0603 ≥ 2.2 µF;
1210 ≥ 100 µF
≤ 10%
≤ 5%
≤ 7%
Exception: 0402 ≥ 180 nF; 0805 ≥ 1 µF;
0201 ≥ 100 nF; 0402 ≥ 330 nF;
1206 ≥ 6.8 µF
0603 ≥ 1 µF;
1210 ≥ 10 µF
≤ 10%
0805 ≥ 2.2 µF;
1206 ≥ 10 µF;
16 V
≤ 5%
≤ 7%
Exception: 0402 ≥ 180 nF; 0603 ≥ 680 nF;
0402 ≥ 330 nF; 0603 ≥ 2.2 µF;
0805 ≥ 1 µF
0805 ≥ 10 µF
≤ 10%
1206 ≥ 10 µF;
1210 ≥ 10 µF
≥ 25 V
≤ 3.5%
≤ 5%
Exception: 0402 ≥ 27 nF;
1206 ≥ 4.7 µF;
0603 ≥ 220 nF;
1210 ≥ 10 µF
0805 ≥ 2.2 µF;
0402 ≥ 180 nF
≤ 7%
0805 ≥ 4.7 µF;
1206 ≥ 10 µF
≤ 10%
Insulation resistance after 1 minute at Ur (DC)
Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
±15%
Operating temperature range:
–55 °C to +85 °C
www.yageo.com
Feb 10, 2012 V.12
YAGEO [ YAGEO CORPORATION ]
